Patioflare PF-BB263 Assembly Instructions Manual

Cast aluminum bench

Available languages

CAST ALUMINUM BENCH

GENERAL INFORMATION:

Your new Bench is made from the finest materials available. It should provide many years of enjoyment

with minimal care.

Keep your Bench clean and apply a coat of wax a few times a year. For best results, clean the Bench

with warm soapy water and use an outdoor furniture wax. If you use furniture covers, always make

sure the Bench is clean and completely dry before covering as mold may form in dark, wet places. Check

the bolts on your Bench regularly to make sure they are tight.

To provide a rust free product this Bench is made of Cast Aluminum which is a relatively soft material. Be

careful not to over tighten your hardware. Stripped hardware is not covered under the manufacturer's

Warranty. The weight limit for this Bench is 400 lbs.

WARNING

DO NOT stand or allow children to stand on the assembled product.

DO NOT tighten bolts completely until instructed to do so. After final alignment, make sure all nuts and

bolts are securely fastened.

NEVER use a power tool to assemble or tighten your furniture. Perform periodic checks to make sure the

hardware is secure and tighten if needed.

CAUTION

READ all instructions before beginning assembly. Failure to do so may result in faulty assembly and

potential injury. Assemble the item on a soft, non-abrasive surface such as a carpet or cardboard to avoid

damaging the item.

Before beginning assembly, make sure all parts are present. Compare parts received with the "Parts

List." If any part is missing or damaged, do NOT attempt to assemble the product. Contact our Customer

Service

Table of Contents

Do you have a question about the PF-BB263 and is the answer not in the manual?

Page 1 CAST ALUMINUM BENCH GENERAL INFORMATION: Your new Bench is made from the finest materials available. It should provide many years of enjoyment with minimal care. Keep your Bench clean and apply a coat of wax a few times a year. For best results, clean the Bench with warm soapy water and use an outdoor furniture wax.
Page 2 BANC EN ALUMINUM MOULE INFORMATIONS GÉNÉRALES Ce nouvel ensemble Banc est fabriqué avec les meilleurs matériaux disponibles et devrait vous procurer plusieurs années de plaisir pour un minimum d'entretien. Vous n'avez qu'à garder votre ensemble Banc propre et appliquer une couche de cire quelques fois par année. Pour de meilleurs résultats, nettoyer l'ensemble Banc avec une eau chaude savonneuse et utiliser une cire pour les meubles de jardin.
Page 3 CAST ALUMINUM BENCH BANC EN ALUMINUM MOULE PARTS LIST LISTE DES PIÈCES Diagram / Illustration Qty. / Qté Diagram / Illustration Qty. / Qté No. / N° No. / N° PARTS / PIÈCES PARTS / PIÈCES Backrest Panel Washer (8mm) Dossier Rondelle (8mm) Spring Washer (8mm)
Page 4 ASSEMBLY INSTRUCTION CAST ALUMINUM BENCH BANC EN ALUMINUM MOULE Place all parts on a clean, soft, level surface. Placer toutes les pieces sur une surface douce, propre et plane Tighten nuts using Wrench. DO NOT OVER TIGHTEN. Serrer les ecrous avec une cl. NE PAS TROP SERRER 3.