DeGuard D-122 Instruction Manual

 Initial Use
Anti-clockwise turn the housing of the keypad to get the panel off
1
Insert the 9V battery
2
Input the code(user code, master code, emergency code) to unlock the door
3
 Insert the batteries
Take the keypad housing off and insert a new 9V battery
1
The red light flashes means you should replace a new battery
2
 Open the door
i. Use user code or master code
Input your user code or master code (both are 1 to 8 digits) and then press "#" button
1
Green light flashes once means the code is right, you can clockwise turn the handle to open the door
2
If the code is wrong, the panel will alarm
3
Ii. Use emergency code
Press '# ' twice, the yellow light on
1
Input emergency code and press '#' to confirm
2
Green light flashes once means the code is right, you can clockwise turn the handle to open the door
3
CAUTION: The preset user code is '12345678', the preset master code is '1234', the preset emergency code is '12345678'
 Close the door
Turn the handle anticlockwise to close the door.
#D-122 Instruction Manual
 Dear valued customer:
Thank you for choosing our products! You have
taken an important step in organizing and
protecting your most valued possessions. Every
series of our safes is professionally made and
designed to provide safety. Please take time to
read and familiarize yourself with the proper
operating procedures of your new safe presented
on the following pages.