2. Component Test
2.1 Button Test
Red
Button:Indicates that the test has not been performed.
Green
Button:Indicates that the button has been "pressed"
Blue
Button: Indicates that the button has been "released"
test.
The corresponding LED will also light up, press once to turn on, then press off.
BANK clicks bright green, then clicks bright red.
OP needs to visually check whether all LEDs are lighting normally.
2.2 Keybed Test
When pressed, it will light green.
Pass When released, it will light blue, indicating that the key is tested for Pass.
2.3 VR Knob Test
Red:Indicates that the test has not been performed.
Red
to Green:Indicates Knob rotates counterclockwise to the minimum value.
Red
to Yellow: Indicates Knob rotates clockwise to the maximum value.
Blue
Knob: Indicates that Knob has completed the forward and reverse rotation to the
operation
The knob completed the test.
Creation Date:2019/9/26
AD20 TEST PROCEDURE
Version 0.2
The button completes the
5