Your New Mouse; Connect Hardware - iHome IH-M131ZN User Manual

your new mouse

scroll wheel
programmable
buttons
programmable buttons
•
be set to perform a variety of functions. (The software
must be installed to change the actions of the buttons.)
The default actions are back and forward.
scroll wheel
• —Move the scroll wheel left or right to scroll
horizontally. Roll the wheel to scroll up and down.
DPI button
• —Your mouse has two sensitivity settings:
standard and high-performance. High-performance mode
allows the cursor to move very quickly and is useful for
activities such as gaming. Press the DPI button to switch
modes.
low battery indicator
•
battery needs to be replaced.
nnte
f
Some button functions require installation of the
included software.
—These two mouse buttons can
—This indicator flashes when the

connect hardware

1. Remove the battery compartment cover, install 1 AA
battery and replace the battery compartment cover.
battery compartment
cover
DPI button
low battery
indicator
2.
Slide the On/Off switch on the bottom of the mouse to
On. The low battery indicator flashes for 10 seconds.
on/off switch
laser sensor
USB nano receiver
storage slot
bottom view of mouse
3