Riverside Furniture Bancroft 81703 Assembly Instructions

Riverside
email: info@riverside-furniture.com
Top Assembly
Glass Pad
1 1 1
" x " x "
2 2 8
6 pcs.
Top Glass Bottom Shelf
1 pc.
5 1 5
M " x 1 " Allen M " x 1" Allen
16 2 16
Head Bolt Head Bolt
8 pcs.
Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during
shipment.
Step 1. To prevent possible scratches or damage, assemble the Table upside down on a soft surface such as a blanket
or carpet.
Step 2. Attach LEGS (C) to the TOP ASSEMBLY (B) using M
5
WASHER (M) and M " FLAT WASHER (L). Do not tighten Bolts until after Step 4.
16
Step 3. Attach BOTTOM SHELF (F) to the LEGS (C) using M
5
WASHER (M) and M " FLAT WASHER (L) and 'L'-BRACKETS (I).
16
Step 4. Attach CASTERS (G) to the BOTTOM SHELF (F) using M
SPRING WASHER (M ) and M
Step 5. Tighten all Bolts using the ALLEN WRENCH (N). Then attach COVER PANEL (D) to TOP ASSEMBLY (B).
Step 6. Carefully turn the Table upright and move to the desired location in the room. Peel and press a GLASS PAD
(A) onto the ledge for the glass at each corner and at the middle of the two long sides of the TOP ASSEMBLY.
Carefully place the TOP GLASS (D) into the TOP ASSEMBLY, on the pads .
Bancroft Tables
Assembly Instructions
FURNITURE
Leg
1 pc. 4 pcs.
L4"xW3" x H2
Caster
1 pc.
5
M " Flat
16
Washer
16 pcs. 32 pcs.
5
" FLAT WASHER (L).
16
Cover Panel
4 pcs.
1 5 5
M " x " Allen
"
2 16 8
Head Bolt
4 pcs. 8 pcs.
5
M " Spring
16
Washer
32 pcs.
5 1
" x 1 "ALLEN HEAD BOLT (J) through M
16 2
5 5
" x "ALLEN HEAD BOLT (H) through M
16 8
5
"x1"ALLEN HEAD BOLT (K) through M
16
Page 1 of 2
Made in China
"L" Bracket
4 pcs.
5mm Allen Wrench
1 pc.
5
" SPRING
16
5
" SPRING
16
5
"
16