Vicon V3200AP Series Instructions For Installation And Operation Manual

Advertisement

Quick Links

INSTRUCTIONS FOR
Installation AND OPERATION -
MODEL V3200AP AND V3210AP SERIES INDoOR SCANNERS - MICROSCAN,

GENERAL

SCOPE

The information in this instruction manual covers the installa-
tion, operation, and maintenance of the following indoor
scanners:
V32 1 OAP
V32 1 O-24AP
Throughout this manual, V3200AP
light-duty scanner models. V3210AP
medium-duty
scanners.
Both
bases.
These units should be installed using approved materials
and wiring practices in accordance with the National
Electrical
Code
and
applicable

INTRODUCTION

The V3200AP
and the V3210AP
continuous-duty units rated for loads up to 15 pounds
and 25 pounds (11.3kg);
mounted in either the upright or inverted positions. Slow-
speed, high-torque drive motors with instant start-stop
characteristics
provide
Drive trains made with acetal output gears provide lubrica-
SCANNER/CONTROL COMPATIBILITY AND OPERATING DISTANCES
Control Model
Scanner
*Working voltage refers to the voltage carried by the cable entering scanner
WARNING: TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Product specifications subject to change without notice.
VICON INDUSTRIES,
INC. 525 BROAD HOLLOW ROAD, MELVILLE, N.Y. 11747TEL:
is used to refer to all
is used to refer to all
models
have
round
mounting
local
wiring
ordinances.
Series Scanners are indooi:-qs"
respectively, when
stability
without
coast.
TABLE I
Model
Working
Voltage*
24V 50/60Hz
24V 50/60Hz
TOLL FREE: 800-645-9116
t
REF. NOTES
SUPERCEDES
X328-384
tion-free operation. These injection-molded scanners have
both a permanent stop to permit full 360 degrees rotation
and adjustable limit stops to set pan travel limits ar desired.
The scanners are energized using the appropriate control
units. Refer to Table I. A line cord option (Model V32OOLC)
available for the V3200AP
them to autoscan
without the use of a control unit.
Wire Size (AWG)
Annealed
Copper
2 2
2 2
2 2
2 0
18
16
2 2
2 0
18
16
(516) 293-2200TELEX: 144581
(OUTSIDE OF NEW YORK)
SHEET NO. REV.
SEC.
X328
885
and V3210AP
models enabling
Maximum Distance
10,000 (3,048)
5,000 (1,524)
1,000 (305)
1,500 (457)
2,500 (762)
4.000 (1,219)
3 5 0 (107)
5 5 0 (167)
9 0 0 (274)
1,400 (427)
1
is

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V3200AP Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Vicon V3200AP Series

  • Page 1 *Working voltage refers to the voltage carried by the cable entering scanner WARNING: TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Product specifications subject to change without notice. VICON INDUSTRIES, INC. 525 BROAD HOLLOW ROAD, MELVILLE, N.Y. 11747TEL: (516) 293-2200TELEX: 144581...
  • Page 2 V3200AP and V3210AP Scanners to square- ance. Use only with mounting hardware recommended by ! base applications. Vicon. Any mounting of the scanner should follow the Instructions in the lnstallatron section. IMPORTANT SAFEGUARDS Ventilation -The scanner should never be mounted near or over a radiator or heat register.
  • Page 3 WIRING THE UNIT TO THE SYSTEM quired, be sure the service technician has used replace- All scanners are supplied with the appropriate mating cable ment parts specified by Vicon or have the same char- connector. Prepare the control cable according to Figure 1. acteristics original part.
  • Page 4 Other units are energized through the main power switch on the control unit. For de- VIEW tailed operating instructions refer to the Vicon instruction sheet supplied with scanner control. - : MAINTENANCE 2 Right Limit Stop...
  • Page 5 9. Mark the R.A. number on the outside of the carton, pre- 3010 Business Park Dr., Ste. B ferably on the shipping label. (Atlanta) Georgia 30071 Refer to the Vicon Dealer Price List for complete warranty information. You must have an R.A. number to send a unit to Vicon X328-885...
  • Page 6 NC YEL R E D RED (AP) 4 <, ‘ N O O R N , <I - - C l I <. 3 (, 3 <r 2 <, CAPACITANCE FOR Cl KEYING PIN I N P U T V O L T A G E 1 C A P A C I T A N C E 6 <i SPARE 2 3 0 V...
  • Page 7 REPLACEMENT PARTS LIST REFERENCE USABLE ON DESIGNATION QTY. DESCRIPTION PART NUMBER M O D E L CAPACITOR 47 MF400 VDC MYLR PVC4047 CAPACITOR 12MF 250 VAC POLY 4 7 M F C A P A C I T O R 4 0 0 V D C M Y L R V32 1 0-AP PVC4047 C A P A C I T O R 1 2 M F 250 VAC...

This manual is also suitable for:

V3210ap series

Table of Contents