ESD CPCI-DVI/2 Hardware Manual

Compactpci graphic card

Advertisement

Quick Links

CPCI-DVI/2
®
CompactPCI
Graphic Card
with Silicon Motion SM502 GPU
Hardware Manual
to Product I.2311.04
CPCI-DVI/2
Hardware Manual • Doc. No.: I.2311.23 / Rev. 1.0
Page 1 of 20
esd electronic system design gmbh
Vahrenwalder Str. 207 • 30165 Hannover • Germany
http://www.esd.eu
Phone: +49 (0) 511 3 72 98-0 • Fax: +49 (0) 511 3 72 98-68

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CPCI-DVI/2 and is the answer not in the manual?

Questions and answers

Summary of Contents for ESD CPCI-DVI/2

  • Page 1 CPCI-DVI/2 Hardware Manual • Doc. No.: I.2311.23 / Rev. 1.0 Page 1 of 20 esd electronic system design gmbh Vahrenwalder Str. 207 • 30165 Hannover • Germany http://www.esd.eu Phone: +49 (0) 511 3 72 98-0 • Fax: +49 (0) 511 3 72 98-68...
  • Page 2 The information in this document has been carefully checked and is believed to be entirely reliable. esd makes no warranty of any kind with regard to the material in this document, and assumes no responsibility for any errors that may appear in this document. In particular descriptions and technical data specified in this document may not be constituted to be guaranteed product features in any legal sense.
  • Page 3 Revision Chapter Changes versus previous version Date First English manual 2014-03-25 Technical details are subject to change without further notice. CPCI-DVI/2 Hardware Manual • Doc. No.: I.2311.23 / Rev. 1.0 Page 3 of 20...
  • Page 4 Conformity The CPCI-DVI/2 is an industrial product and meets the demands of the EU regulations and EMC standards printed in the conformity declaration at the end of this manual. Warning: In a residential, commercial or light industrial environment the CPCI-DVI/2 may cause radio interferences in which case the user may be required to take adequate measures.
  • Page 5: Table Of Contents

    DVI-I Interface (X700)......................16 5.2 USB............................. 17 Serial Interface........................18 5.3.1 SER0 (RS-232) interface via RJ12................18 5.3.2 SER1-3 via X1140.......................18 Declaration of Conformity......................19 Order Information........................20 CPCI-DVI/2 Hardware Manual • Doc. No.: I.2311.23 / Rev. 1.0 Page 5 of 20...
  • Page 6: Overview

    TFT-displays by digital video signals. The DVI-I connector including RGB-analog is accessible via the front panel. The CPCI-DVI/2 is equipped with two serial interfaces. The front-side interface can be switched to RS-232 or RS-422 and supports a touchscreen or general purpose serial I/O.
  • Page 7: Pcb View With Connectors And Jumpers

    Overview 1.1 PCB View with Connectors and Jumpers Figure 2: PCB top view of CPCI-DVI-2 See also page 16 for signal assignments of the CAN connectors. CPCI-DVI/2 Hardware Manual • Doc. No.: I.2311.23 / Rev. 1.0 Page 7 of 20...
  • Page 8: Position Of The Connectors In The Front Panel

    Overview 1.2 Position of the Connectors in the Front Panel Figure 3: Connectors in the front panel Page 8 of 20 Hardware Manual • Doc. No.: I.2311.23 / Rev. 1.0 CPCI-DVI/2...
  • Page 9: Hardware Installation And Configuration

    Make sure that the jumpers for RS-422/RS-232 interface and internal termination of SER0 are set according to the intended usage (see chapter “2.3 Jumper Setting”). Insert the CPCI-DVI/2 board into the selected CompactPCI slot. Carefully push the board until it snaps into place.
  • Page 10: Demounting

    A3. Discharge your body as described above. A4. Unfasten the mounting screws in the front panel. A5. Unfasten the CPCI-DVI/2 by activating the eject lever and pull the module carefully out of the slot. A6. Remove the PCI extension if necessary.
  • Page 11: Technical Data

    CompactPCI-Specification PICMG ® 2.0 R 2.1 Connector Universal-Board, not keyed Connector coding (3.3 V or 5 V signalling voltage) Table 2: Data of the CompactPCI bus CPCI-DVI/2 Hardware Manual • Doc. No.: I.2311.23 / Rev. 1.0 Page 11 of 20...
  • Page 12: Dvi-I Interface

    Silicon Motion SM502 graphic controller USB interface USB 1.1, Full-Speed, 12 Mbit/s Connector USB type A plug Table 5: Data of the USB interface Page 12 of 20 Hardware Manual • Doc. No.: I.2311.23 / Rev. 1.0 CPCI-DVI/2...
  • Page 13: Software Support

    The Linux-source code is released under the terms of the GNU Public License (GPL). License information The complete text of the license is contained in the esd-document “3rd Party Licensor Notice” as part of the product documentation. esd provides the complete operating system source code on request.
  • Page 14: Description Of The Units

    4.1.3 Connection of SER0 as RS-422 Interface The diagram is used to explain the short terms for signals as used in the chapter connector assignments. The signal terms are exemplary for the connection of the CPCI-DVI/2. CPCI-Board e.g. Touch...
  • Page 15: Connection Of Ser0 As Rs-232 Interface

    4.1.4 Connection of SER0 as RS-232 Interface The diagram is used to explain the short terms for signals as used in the chapter “5. Connector Assignments”. The signal terms are exemplary for the connection of the CPCI-DVI/2 via the adapter cable RJ12-DSUB9.
  • Page 16: Connector Assignments

    DVI_ S1/3_ n.c. n.c. XVCC1 plug TX1- TX1+ BLUE HSYNC detect Signal DVI_ DVI_ DVI_ DVI_ DVI_ DVI_ S0/5_ n.c. n.c. CLK_ TX0- TX0+ TXC+ TXC- Page 16 of 20 Hardware Manual • Doc. No.: I.2311.23 / Rev. 1.0 CPCI-DVI/2...
  • Page 17: Usb

    The maximum length of the cables connected to the USB interface is l MAX = To comply with electromagnetic compliance and electromagnetic interference the cable length must not exceed this maximum length! CPCI-DVI/2 Hardware Manual • Doc. No.: I.2311.23 / Rev. 1.0 Page 17 of 20...
  • Page 18: Serial Interface

    Data Input SER0_Rx+ SER0_RTS Handshake Output SER0_Tx- SER0_CTS Handshake Input SER0_Rx- The data direction of the signals is given as viewed from the CPCI-DVI/2 board. 5.3.2 SER1-3 via X1140 Device connector: 10-pin IDC connector, male Signal Signal n.c. n.c. n.c.
  • Page 19: Declaration Of Conformity

    Declaration of Conformity 6. Declaration of Conformity CPCI-DVI/2 Hardware Manual • Doc. No.: I.2311.23 / Rev. 1.0 Page 19 of 20...
  • Page 20: Order Information

    For detailed information about the driver availability of your special operating system, please contact our sales team. Table 6: Order information PDF Manuals For availability of manuals see table below. Please download the manuals as PDF documents from our esd website www.esd.eu for free. Manuals Order No.

Table of Contents