MAXSA 44642-CAM-BK Instruction Sheet

Solar video camera & floodlight

Addendum: Using the Camera Module with Apple MacOS

You will need to reference the main manual for other non-apple specific operations.

The instructions in this addendum depict the steps to take when using an Apple computer running

MacOS. If you are using a computer with Windows, please refer to the main instructions included with

the product.

This section covers the steps you need to take to ensure your camera module has the correct date and

time for your time zone; however it is not required and the video camera floodlight will still function and

record videos if this section is skipped.

1. To set the time and date, the camera module must be removed from the floodlight and connected

to a computer via the USB port.

2. Plug the camera module into a USB port on your computer. Two new drives

should appear in the upper right-hand corner of your desktop. The Sync

Program drive will appear as a DVD called "SyncCameraClock" and the

storage card will appear as a removable drive called "NO NAME".

4. Open the "MacOSX" folder and you will see the Sync program.

The camera does not automatically sync when you plug the

camera into a USB port. You must run this program to sync the

camera.

Open the "Sync Camera Clock" drive. You will see

two folders: "Mac OSX" and "Windows".

Table of Contents

Do you have a question about the 44642-CAM-BK and is the answer not in the manual?

Page 1 Addendum: Using the Camera Module with Apple MacOS You will need to reference the main manual for other non-apple specific operations. The instructions in this addendum depict the steps to take when using an Apple computer running MacOS. If you are using a computer with Windows, please refer to the main instructions included with the product.
Page 2 5. When the program opens, you will see a display that shows the date and time on the computer listed as “PC Clock” and the date and time on the camera listed as “Camera Clock”. They will most likely be different as the camera has not yet been synced. Click the “Time Synchronize” button to sync the camera clock to the computer clock.
Page 3 5. The next set of folders you see are named by the date the videos were recorded. The folders holding the videos for each day will be named with the following format: YYYYMMDD (Year, Month, Day) For example, all videos recorded on March 23rd, 2016 will be in a folder labeled 20160223. Find the day you want to view and double-click the folder.
Page 4 SAVING THE VIDEOS 1. Open the folder on your hard drive where you want to store the videos. 2. Go back to the folder view for the micro-SD card storage and highlight all of the files you wish to save. 3.

44642-cam-wh