Advertisement
Quick Links
Advertisement
Summary of Contents for Magnum AVL EZ750
- Page 1 Installation Guide Hold for Model name or p/n...
- Page 2 Identification Pre Installation Installation Configuration Troubleshooting Contact Us...
- Page 3 Hardware EZ750 VS800 VS800 Aux Camera (driver) VS800 Kit harness P247 Accessories T6 tool & extra screw Driver Camera Retainer Cable clips Alcohol pad What’s Included...
-
Page 4: Device Identification
Device Identification Record the IMEI number of the EZ750 prior to installation Record the serial number of the VS800 prior to install Download & install AI Fleet Cam app to your device Things to do before Installation... - Page 5 VS800 Installation • Remove T6 screw using provided tool and set aside • Slide cover to remove and set aside • Remove P1 screw to release and remove top cover • Unplug the buzzer • Set aside top cover Device Installation...
-
Page 6: Device Installation
VS800 Installation MAX 20 CM RIGHT OF CENTER Select location for camera placement • As close to center as possible • No more than 20 cm to right from center • Not out side of rearview boundary left of center •... - Page 7 VS800 Installation • Remove adhesive backing and firmly press camera into place. • Hold for 30 seconds • Glass must be dry—run vehicle defroster on high if moisture is present • Recommended application temperature is 70°F –100°F • Warm or cool windshield as needed for application •...
- Page 8 VS800 Installation Select location for driver facing camera placement • Left of center with a clear line of sight • Above AS1 line • Camera rotates to align • Ideal Driver facing camera placement Remove adhesive backing and firmly press camera into place.
- Page 9 VS800 Installation • Route and plug driver facing camera into main camera • Install retainer • Install cable clips as needed • Do Not Reinstall the cover yet! Device Installation...
- Page 10 VS800 Installation • Route cables neatly towards where tracking device is to be installed • When routing cables stay clear of any moving parts, ex.— Steering shaft, pedals, airbags • Secure using wire ties as needed • DO NOT OBSTRUCT AIRBAGS! Device Installation...
- Page 11 EZ750 Installation • Select location for tracking device • Ensure top of device has a clear line of sight to the sky • Device will function properly through most materials with the exception of metal. Do Not Place Directly Under Metal! •...
- Page 12 EZ750 Multi-function Button Press Duration Action Power on 2-4 seconds Check for errors (see pg 16) 5-10 seconds Sync settings w/ cloud device Power down (if unlocked and disconnected >15 seconds from power) EZ750 LED Status — Live Data Power GPS off Modem off Device off or sleeping...
- Page 13 Measure vehicle • Measure and record the following • Vehicle width (outside front wheel to wheel) • Distance from front bumper to base of windshield • Height from camera to ground Set up Camera via app • Log into app and proceed with configuration •...
-
Page 14: Led Indicator
LED Troubleshooting VS800 LED Indication • Low Voltage • Power on / Booting • Power on—Operational • • Event Create Serial Comm Issue Device Malfunction • General • Check Memory Card • Angle Adjustment X • Check Camera Connection LED Indicator Device Installation... - Page 15 LED Troubleshooting EZ750 LED Flash Count 3 Low GPS signal Network 1 Sim Error 2 No Network 3 Unable to register w/network 5 Service activation error 6 Service sync failure Power 4 Low Battery 5 Error reading diagnostics 10 Other system error Error Codes To check the system status press and hold the multi-function...
- Page 16 Tracking Unit Installation Hold for system diagram • Plug the camera harness into the kit harness • Plug the kit harness into the diagnostic harness • Plug the diagnostic harness in to the tracking unit Device Installation...
- Page 17 • • Device Installation...
- Page 18 Hold for Magnum AVL about us statement and or sup-port info Magnum Electronics, Inc. dave.lange@magnumelectronics.com 302-734-9250...