MOOD Encompass CM Update Instructions

Audio Update Instructions
1. Verify that LCD on the unit face is illuminated and displays text.
2. Press the "Eject" button to open the CD-ROM tray.
3. Place the update disc* with the label facing upward on the tray. Press the
1. "Eject" button again to close the tray.
4. After a few seconds, the LCD will display a "Copying" message, followed
2. by a file name.
5. After all audio files are copied from the disc, the LCD will return to
3. displaying the artist name and song title of the current selection. (As each
4. disc may include more than 100 songs, the load process may require
5. several minutes per disc.)
6. Once complete, the disc may be removed by pressing the "Eject" button.
7. Repeat these steps for all update discs. Your audio and scheduling files
8. have now been updated.
* All update discs include the most current system firmware. If the current version
is newer than the existing version, it will automatically be updated. Loading new
firmware will cause the system to restart approximately 30 seconds after the disc is
inserted. After restarting, the unit will resume the audio file load at step four
(above). This will copy any audio and scheduling files, which may also be
included on the same disc.
For support, contact MOOD: Client Support at 800.331.3340
Encompass CM