Table of Contents
Advertisement
Quick Links
TQ6 & TQ6+
USER'S MANUAL
Rev 2.1 - April 2022
1. IN THE BOX
A) TQ6 / TQ6+
B) Clamp
C) Allen Screws
D) Allen Key
For support, contact us at
support@virtual-fly.com
© 2022 Virtual Fly, SL
All trademarks and brand names are
trademarks or registered trademarks of their
respective owners. All rights reserved.
C. Maria Aurèlia Capmany, 21
P.I. La Fàbrica – 08297 Castellgalí (Spain)
Phone: (+34) 938 333 301
https://www.virtual-fly.com
Advertisement
Table of Contents
Related Manuals for Aircatglobal VirtualFly TQ6
Summary of Contents for Aircatglobal VirtualFly TQ6
- Page 1 TQ6 & TQ6+ USER’S MANUAL Rev 2.1 - April 2022 1. IN THE BOX A) TQ6 / TQ6+ B) Clamp C) Allen Screws D) Allen Key For support, contact us at support@virtual-fly.com © 2022 Virtual Fly, SL C. Maria Aurèlia Capmany, 21 All trademarks and brand names are P.I.
- Page 2 2. HARDWARE SETUP OPTION B: Attaching from bottom 2.1 ATTACHING TO DESKTOP/HOME COCKPIT SETUP Make sure to unscrew the two rubber feet before setting You have two options to attach the TQ6/TQ6+ using the up the clamp. included clamp (B) and allen screws (C). For both options, place the TQ6/TQ6+ on the surface it will rest and thighten the knob (a) until you feel strong resistance.
- Page 3 2.2 CONNECTING TO PC Connect the integrated USB cable from the TQ6/TQ6+ to the computer where the flight simulation software is running. 2.3 ADJUSTING THE LEVER’S HARDNESS Your TQ6/TQ6+ offers the possibility to adapt the levers’ hardness to your preference. You can do so by rotating the knobs, (b) or (c), as seen in the following diagrams.
- Page 4 3. SOFTWARE SETUP VFHub takes care of making your TQ6/TQ6+ work with MSFS, Prepar3D and X-Plane 11, so it must always be running V4-V5 The TQ6/TQ6+ interacts with any computer as a joystick (HID), when you use the TQ6/TQ6+. so it is compatible with any flight simulation software. Below, you have 2 options for setting up your TQ6/TQ6+ with the If your device is a TQ6 non-PLUS version, make sure to most popular flight simulation software: MSFS, Prepar3D, and...
- Page 5 MSFS TQ6/TQ6+ If you want to customize how your works, If you own a TQ6 PLUS version, your device is ready to be select the device’s options button ( ) in VFHub’s used in MSFS. If you own a TQ6 non-PLUS version, open Dashboard.
Need help?
Do you have a question about the VirtualFly TQ6 and is the answer not in the manual?
Questions and answers