Page 1
Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
Page 2
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.
Do not place any heavy objects on the device or connection cables. • If smoke, an abnormal noise, or a strange odor is present, immediately turn the device off and call your dealer or ViewSonic®. It is dangerous to continue using the device. •...
Page 4
• When connecting to a power outlet, DO NOT remove the grounding prong. Please ensure grounding prongs are NEVER REMOVED. • Protect the power cord from being treaded upon or pinched, particularly at the plug, and at the point where it emerges from the equipment.
Contents Safety Precautions ............3 Introduction ..............7 Package Contents ....................7 Product Overview - VA2732-h ................8 Front and Rear View ....................8 I/O Ports ......................... 8 Product Overview - VA2732-mh ................9 Front and Rear View ....................9 I/O Ports ......................... 9 Product Overview - VA2732-mhd .................10 Front and Rear View ....................
Page 6
Appendix ..............32 Specifications ......................32 Glossary ........................34 Troubleshooting ....................38 Maintenance......................40 General Precautions ....................40 Cleaning the Screen ....................40 Cleaning the Case ....................40 Regulatory and Service Information ......41 Compliance Information ..................41 FCC Compliance Statement ................... 41 Industry Canada Statement ................... 41 Declaration of RoHS2 Compliance.................
Introduction Package Contents • Monitor • AC/DC Power Adapter • Power cord • Video cable • Quick start guide NOTE: The power cord and video cables included in your package may vary depending on your country. Please contact your local reseller for more information.
Product Overview - VA2732-h Front and Rear View I/O Ports HDMI 1. HDMI (v. 1.4) 2. VGA 3. DC IN NOTE: For more information about the 1(«)/2/3/4/5( ) key and its functions, refer to “Hot Keys” on page 21.
Product Overview - VA2732-mh Front and Rear View I/O Ports HDMI 1. HDMI (v. 1.4) 2. VGA 3. DC IN 4. Audio In NOTE: For more information about the 1(«)/2/3/4/5( ) key and its functions, refer to “Hot Keys” on page 21.
Product Overview - VA2732-mhd Front and Rear View I/O Ports HDMI 1. HDMI (v. 1.4) 2. VGA 3. DC IN 4. Audio In 5. DisplayPort (v. 1.2) NOTE: For more information about the 1(«)/2/3/4/5( ) key and its functions, refer to “Hot Keys” on page 21.
Initial Setup Installing the Stand NOTE: Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.
4 pieces NOTE: Wall mount kits are sold separately. To obtain a wall mounting kit, contact ViewSonic® or your local dealer. 1. Turn off the device and disconnect all cables. 2. Place the device on a flat, stable surface with the screen facing down.
Using the Security Slot To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object. Below is an example of setting up a security slot locking device on a table.
Making Connections This section guides you on how to connect the monitor with other equipment. Connecting to Power 1. Connect the power cord to the power adapter. 2. Connect the power adapter to the DC IN jack at the rear of the device. 3.
Using the Monitor Adjusting the Viewing Angle Tilt Angle Adjustment Tilt the monitor forwards or backwards to the desired viewing angle (-5˚ to 20˚). NOTE: When adjusting, support the stand firmly with one hand while tilting the monitor forwards or backwards with the other hand. 18 18...
Turning the Device On/Off 1. Plug the power cord into a power outlet. 2. Press the Power button to turn on the monitor. 3. To turn the monitor off, press the Power button again. NOTE: The monitor will still consume some power as long as the power cord is connected to the power outlet.
Quick Menu Press the 1( key to activate the Quick Menu. «) View Mode Standard Game Movie Text Mono NOTE: Follow the key guide that appears on the bottom of the screen to select the option or make adjustments. Menu Description ViewMode Select one of the preset color settings.
Hot Keys When the On-Screen Display (OSD) Menu is off, you can quickly access special functions by using the control panel keys. Description Press and hold the keys to lock/unlock the OSD Menu. «) When the menu appears on the screen, continue holding both keys for 10 seconds to lock/unlock the OSD Menu.
Page 22
Description 2 + 3 Power Press and hold the keys to lock/unlock the button. When the menu appears on the screen, continue holding both Power keys for 10 seconds to lock/unlock the button. Power Lock/Unlock Locking Power Button Press and hold for 10s to lock power If the Power...
Configuring the Settings General Operations 1. Press the 2/3/4 key to display the On-Screen Display (OSD) Menu. Manual Image Manual Image Input Audio Adjust ViewMode Color Adjust Setup Menu Input Audio Adjust ViewMode Color Adjust Setup Menu Adjust Adjust Select Select D-Sub D-Sub...
Page 24
3. Press the 1( or 2 key to select the desired menu option. Then press the 3 key «) to enter the sub-menu. Input Audio Adjust ViewMode Color Adjust Manual Image Setup Menu Select Adjust Contrast/Brightness sRGB Color Temperature Bluish Color Space Cool Color Range...
On-Screen Display (OSD) Menu Tree - VA2732-h Main Menu Sub-menu Menu Option D-Sub Input Select HDMI Standard Game Movie ViewMode Text Mono Contrast (-/+, 0~100) Contrast/Brightness Brightness (-/+, 0~100) sRGB Bluish Cool Color Adjust Native Color Temperature Warm (-/+, 0~100) User Color Green (-/+, 0~100)
Page 26
Main Menu Sub-menu Menu Option Auto Image Adjust Horizontal Size (-/+, 0~100) Horizontal Position (-/+, 0~100) H./V. Position Vertical Position (-/+, 0~100) Fine Tune (-/+, 0~100) (-/+, Sharpness 0/25/50/75/100) Blue Light Filter (-/+, 0~100) Aspect Ratio Manual 16:9 Image Adjust 16:10 Overscan (-/+, 0/10/20/30/4...
Page 27
Main Menu Sub-menu Menu Option English Français Deutsch Español Italiano Suomi Svenska Language Select Русский Türkçe Česká 日本語 한국어 繁體中文 简体中文 Resolution Notice Information OSD Time Out (-/+, 5/15/30/60) Setup Menu OSD Background Power Indicator Auto Power Off 30 Minutes 45 Minutes Sleep 60 Minutes...
On-Screen Display (OSD) Menu Tree - VA2732-mh / VA2732-mhd Main Menu Sub-menu Menu Option D-Sub HDMI Input Select DisplayPort (for VA2732-mhd) Volume (-/+, 0~100) Mute Audio Adjust Video Input (DP or HDMI) Audio Input Audio In Standard Game Movie ViewMode Text Mono Contrast...
Page 29
Main Menu Sub-menu Menu Option Auto Image Adjust Horizontal Size (-/+, 0~100) Horizontal Position (-/+, 0~100) H./V. Position Vertical Position (-/+, 0~100) Fine Tune (-/+, 0~100) (-/+, Sharpness 0/25/50/75/100) Blue Light Filter (-/+, 0~100) Aspect Ratio Manual 16:9 Image Adjust 16:10 Overscan (-/+, 0/10/20/30/4...
Page 30
Main Menu Sub-menu Menu Option English Français Deutsch Español Italiano Suomi Svenska Language Select Русский Türkçe Česká 日本語 한국어 繁體中文 Setup Menu 简体中文 Adaptive Sync Resolution Notice Information OSD Time Out (-/+, 5/15/30/60) OSD Background Power Indicator Auto Power Off...
Page 31
Main Menu Sub-menu Menu Option 30 Minutes 45 Minutes Sleep 60 Minutes 120 Minutes Standard ECO Mode Optimize Setup Menu Conserve DisplayPort 1.1 (for VA2732-mhd) Auto Detect DDC/CI Memory Recall...
Appendix Specifications Item Category Specifications IPS, TFT Active Matrix 1920 x 1080 LCD; Type 0.3114 (H)mm x 0.3114 (V)mm pixel pitch Display Size 69 cm, 27" Color Filter RGB vertical stripe Glass Surface Anti-Glare type, 3H hard coating RGB Analog (0.7/1.0 Vp-p, 75 Ω) Separate Sync Analog: f 24-86 Khz, f...
Page 33
Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display. Please use the power adapter from ViewSonic® or an authorized source only. The test condition follows EEI standards.
Glossary This section describes the standard glossary of terms used in all LCD display models. All terms are listed in alphabetical order. NOTE: Some terms may not be applicable to your monitor. Advanced DCR Advanced DCR technology automatically detects the image signal and intelligently controls the backlight brightness and color to improve on the ability to make the black blacker in a dark scene, and make the white whiter in a bright environment.
Page 35
Displays the timing mode (video signal input) coming from the graphics card in the computer, the LCD model number, the serial number, and the ViewSonic® website URL. See your graphics cards’s user guide for instructions on changing the resolution and refresh rate (vertical frequency).
Page 36
Manual Image Adjust Displays the “Manual Image Adjust” menu. You can manually set a variety of image quality adjustments. Memory Recall Returns the adjustments back to factory settings if the display is operating in a factory preset timing mode listed in the “Specifications” of this manual. NOTE: ...
Page 37
ViewMode ViewSonic’s unique ViewMode feature offers “Game”, “Movie”, “Web”, “Text”, “MAC”, and “Mono” presets. These presets are specifically designed to deliver an optimized viewing experience for different screen applications.
• Connect the monitor to another computer. • If you have an older graphics card, contact ViewSonic® for a non-DDC adapter. • Adjust brightness and contrast settings via the OSD Screen image is too Menu. light or dark •...
Page 39
Problem or Issue Possible Solutions The screen appears • Make sure the “Blue Light Filter” is Off. yellow The OSD Menu • Check whether the OSD Menu is locked. If yes, press and hold the 3 and 5 key for 10 seconds. does not appear on the screen/the •...
• ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the monitor. • ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
Regulatory and Service Information Compliance Information This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit. FCC Compliance Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
Schedule 2 of the Rule. Product Disposal at End of Product Life ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic®...
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR® partner, ViewSonic® Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein;...
For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product’s serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa Australia Bangladesh www.viewsonic.com/au/ www.viewsonic.com/bd/ 中国 (China) www.viewsonic.com.cn www.viewsonic.com/hk/ 香港 (繁體中文) Hong Kong (English) India www.viewsonic.com/hk-en/ www.viewsonic.com/in/...
How long the warranty is effective: ViewSonic® displays are warranted for between 1 and 3 years, depending on your country of purchase, for all parts including the light source and for all labor from the date of the first consumer purchase.
Page 47
(e) the serial number of the product. • Take or ship the product, freight prepaid, in the original container to an authorized ViewSonic® service center or ViewSonic®. • For additional information or the name of the nearest ViewSonic® service center, contact ViewSonic®. Limitation of implied warranties:...
Page 48
Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: • Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of...
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components &...
Page 50
Exclusion of damages: ViewSonic®’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: • Damage to other property caused by any defects in the product, damages...
Page 51
Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Villahermosa: Distribuciones y Servicios Computacionales SA de CV.
Page 52
C0 M91 Y72 K24 Process Color C0 M0 Y0 K100 Process Color C0 M91 Y72 K24 Process Color Pantone Black C Spot Color Pantone 187 C Spot Color...