Sony ILCE-7C Help Manual page 292

Help Guide
Interchangeable Lens Digital Camera
ILCE-7C
α7C
Changing the function of the dial temporarily (My Dial Settings)
You can assign the desired functions to the control dial and the control wheel, and register up to three combinations of
settings as "My Dial" settings. You can quickly recall or switch registered "My Dial" settings by pressing the custom key
you assigned in advance.
Registering functions to "My Dial"
Register the functions that you want to assign to the control dial and the control wheel as [My Dial 1] through [My Dial 3].
1.
MENU → (Camera Settings2) → [My Dial Settings].
2.
Select a dial or wheel for
3.
Select the desired function to assign using the top/bottom/left/right sides of the control wheel, and then press the
center of the control wheel.
Select "--" (Not set) for a dial or wheel to which you do not want to assign any function.
4.
After you select functions for all of the dials and the wheel in
The settings for (My Dial 1) will be registered.
If you want to register
Assigning a key to recall "My Dial"
Assign a custom key to recall the registered "My Dial" settings.
1.
MENU → (Camera Settings2) → [
to recall "My Dial."
2.
Select the number of the "My Dial" setting that you want to recall or the pattern for switching "My Dial."
Menu item details
My Dial 1 during Hold /My Dial 2 during Hold/My Dial 3 during Hold:
While you hold down the key, the functions that you registered in [My Dial Settings] are assigned to the dial/wheel.
My Dial 1→2→3 :
Each time you press the key, the function changes in the following sequence: "Normal function → Function of My Dial 1
→ Function of My Dial 2 → Function of My Dial 3 → Normal function."
Toggle My Dial 1 /Toggle My Dial 2/Toggle My Dial 3:
The function registered using [My Dial Settings] is maintained even if you do not hold down the key. Press the key again
to return to the normal function.
Shooting while switching "My Dial"
During shooting, you can recall "My Dial" using the custom key, and shoot as you change the shooting setting by turning
the control dial/control wheel.
In the following example, the functions listed in the table below are registered to "My Dial," and [My Dial 1→2→3] is
assigned to the C (Custom) button.
Operating parts My Dial 1
(My Dial 1), and press the center of the control wheel.
(My Dial 2) and (My Dial 3) as well, follow the same procedure as described above.
Custom Key] or [
My Dial 2 My Dial 3
(My Dial 1) by repeating Steps 2 and 3, select [OK].
Custom Key] → Select the key that you want to use
292