Varad Vision SCANNERS Quick Start Manual

Thank you for purchasing our new generation
o f S C A N N E R S . W i t h o u r l a t e s t
®
microcontroller technology, software and
industrial design we have added a new level
of excitement to the art of visual theft
deterrence.
SCANNERS is a registered trademark of Varad USA
®
IM-VSX50V2

Features:

• Super bright LEDs
• 10 Selectable patterns
• Two speed selections
* The VS260c has NO ability to schange speed

Mounting the SCANNERS :

Find suitable location for installation. Drill any holes if
®
necessary and clean surface with rubbing alcohol to
remove oils. Use the provided 3M™ double sided tape
and mount. Refer to following diagram for wiring
instructions.

Installation with alarm system:

SCANNERS will activate when alarm system is activated.
®
SCANNERS
Black
Battery negative or chassis ground
Red
Battery positive (constant)
Orange
Alarm system accessory output or ground
output when armed.
®
®

Installation without alarm system:

SCANNERS will activate when engine is turned off.
®
SCANNERS
®
Black
Battery negative or chassis ground
Red
Battery positive (constant)
Orange
Ignition - Ground when engine is "OFF".
(See fuse box)

How to operate SCANNERS :

®
Program button
Ignition
OFF
Program button on Raptor
(Use a small paper clip)
Ignition
ON