ADT RC8325- Quick Start Manual

RC8325-ADT
« Help Center
RC8325-ADT
The RC8325 is a Pulse compatible day and night camera. This camera is intended for use with ADT Pulse. It
can be used as either a wired or wireless camera using Wi-Fi connectivity.
RC8325-ADT
Manual

Reset

Troubleshooting

https://alpha.adt.com/help/124[11/12/2018 10:22:41 PM]
RC8325-ADT Wireless Indoor HD Camera Installation Manual
The reset button has two functions:
Reboot – If your camera is unresponsive or is encountering technical issues,
you may need to reboot your camera. To reboot, press and release the Reset
button.
Clear All Data – If rebooting your camera does not resolve the issue or if you
need to re-enroll your camera to Pulse, you may need to clear all data. To
clear all data and restore the factory default settings:
1. Power on the camera
2. Press and hold the Reset button for fifteen seconds
3. When you release the Reset button, the camera is reset to the factory
default settings
Wi-Fi Camera Offline
and is listed as "status unknown" in the ADT Pulse app.
Camera Video Quality
issues with your camera's video quality.
Select
RC8325-ADT
– Please refer to this page if your Wi-Fi is not connected
– Please refer to this page if you are encountering