Appliance description The FKI Waffle Iron is designed for heating all kinds of waffles by direct contact with the pans. The Waffle Iron have an upper and a lower corrugated and Teflon coated pan, which, properly applied, gives the prod-...
Manufacturer FKI Fast Food Teknik a/s Byghøjvej 5, Verninge DK-5690 Tommerup www.fki.dk Appliance label 2.1.3.1 Type code: SWI-22 Technical specifications and power consumption Connection voltage: 230 V AC Connection frequency: 50/60 Hz Attention! Only connect to a grounded power outlet.
These instructions and the appliance itself are provided with important safety information that must always be read and observed at all times. FKI Fast Food Teknik a/s disclaims any and all liability for non- compliance with these safety instructions, for inappropriate use of the appliance or the use of incorrect set- tings.
Transport/installation/fixation Transport The Waffle Iron is delivered secured to a transport pallet and should only be transported in the same way if moved. WARNING: Do not move the appliance during operation. Moving and setting up the appliance must be performed by two or more people! RISK of injury! Wear protective gloves and safety footwear during unpacking and installation - cut hazard.
Do not use extension cords or multi-socket outlets. After installation is completed there must be no direct access to the electrical components. Never touch the appliance if you are wet or have bare feet. Do not use this appliance if the power cord or plug is damaged, if the appliance is not working properly, if it is damaged or if it has been dropped on the floor.
Clean the pans with a soft brush. Never use steel tools for cleaning pans, as these can damage the Teflon coating. Clean the outside surfaces of the appliance with a damp cloth, to which a mild detergent may be added. Remember to wipe with a clean cloth if detergent is used.
4.2.1 Operation of timer Waffle iron is equipped with a fixed timer. The timer is provided with a pushbutton. By pressing the Timer Button, a LED light, indicates that the countdown is going on. At the expiry of the time an alarm sounds. The alarm is stopped by pressing the Timer button.
Repairs and spare parts Repairs should only be carried out by authorized service personnel with knowledge of electrical equipment. Specifications for spare parts...
Page 11
SPAREPARTS Item No. Pcs. Description 83-10759 Heat Shield 83-09709 Bracket for heat element 83-09716 Heat element 72-05515 Front screen 83-10821 Teflon Pan 83-08202 Knob 74-00056 Switch 72-03643 Thermostat 72-01322 Timer 72-03509 Connector 83-10028 Power supply 82-06506 Foot 72-00010 Nut M16 72-00011 Fitting M16X1.5 72-00012...
5 Disposal Packaging The packaging should not be left in the environment but should be disposed of in accordance with local regulations. When the appliance is no longer in use The appliance is labelled with a recycling symbol in accordance with Danish Executive Order 148 of 8 Febru- ary 2018 (Electronic Waste Executive Order/Danish-Elektronikaffaldsbekendtgørelsen).