Summary of Contents for BOOCAX Penguin
- Page 1 Quick Guide Customer Service Hotline 400–161–8661 http：//www.boocax.com Better Robot, Better Life. Penguin Plasma Air Sterilization Robot...
-
Page 2: Install Battery
Unpack & Inspect items ( 2 ) With the battery Check items connector facing down, gently put it into the battery slot; ( 01 ) Robot cabin ( 02 ) Robot chassis ( 03 ) Charging pile, power cord ( 04 ) Warranty card ( 05 ) Quick Guide ( 06 ) Positioning QR code ( 07 ) Battery... - Page 3 2. Docking the chassis and the cabin 3. Place the charging pile Place the charging pile against the ( 1 ) The direction of the cabin camera and the chassis camera wall and connect the power cord should be consistent; ( 2 ) Hold the cabin in hand and align it with the chassis front and rear;...
-
Page 4: Download And Install
( 3 ) Turn on the WiFi of the Android device and connect the WiFi name of Penguin; ( 4 ) As shown in the figure , click on Penguin Wifi name Penguin-PG1-XXXX, and prompt “tap to share password” robot 123, the connection is successful. - Page 5 3. After the configuration is successful, Penguin will automatically turn off its own hotspot WiFi (Penguin-PG1-XXXXXX). If you need to search for the robot, you need to connect to the WiFi connected to Penguin, and you can see it in “Local”page. Home...
-
Page 6: Rapid Deployment
Build a scene map Deploy walking route Build a map Rapid Deployment ( 1 ) Deploy route - rapid deploy, follow the prompts to set the “charging point”, ( 1 ) Click "Deploy" at the bottom "path point" and"disinfection point“. of the homepage-"Build a map";... -
Page 7: Panel Control
Precautions: Panel control Composition Precautions Panel control Precautions for composition： ( 1 ) When composing a picture, it is recommended to start from 1m in front of the charging pile; after scanning the work area, you need to return to the starting point of the Power status Air volume composition and use the APP to complete the composition;... -
Page 8: Legal Disclaimer
Legal Disclaimer Legal Disclaimer Please clear all kinds of obstacles blocking the robot's route before the robot works (Sills higher than 10mm, narrow doors less than 600mm, and slopes greater than 5 degrees), so as not to affect the normal operation of the equipment;...
Need help?
Do you have a question about the Penguin and is the answer not in the manual?
Questions and answers