Download Print this page
XKGlow XK-MINI-KIT Manual

XKGlow XK-MINI-KIT Manual

Mini xkchrome controller

Advertisement

Quick Links

XK-MINI-KIT – Mini XKchrome Controller
Within One year after the purchase date, the original buyer may return any XKchrome controller that has
failed due to a defect in materials or workmanship.
Installation of this product must be performed by a licensed professional. Should the failure of the product be
the result of damage occurring as a result of improper installation, alteration of the product or an act or omission
on the part of the consumer, this warranty is void. XKGLOW Lighting shall not be responsible for any
consequential damages which arise from the use and/or installation of the product. If the kit is installed in any
manner other than specified, XKGLOW Lighting reserves the right to deny any warranty claims at the discretion
of the technical support department. Any product return must include the original packaging, invoice number and
a statement of the alleged defect. Upon receipt of the returned product, the company will test the product for
defect. If the results of the testing do not support the warranty claim, do not reveal any defect or indicate
consumer negligence in the installation and handling of the product, then the product will be returned to you and
you will be charged a reshipping fee. If the product is returned from an address within the continental United
States, within the first 30 days after purchase, and is found to be defective, XKGLOW Lighting will exchange or
refund the original purchase expense. This offer does not extend to the cost for shipping charges on any
international packages.
Please check your local and state laws for the proper use of this product.
Improper installation of electrical products such as lighting may cause damage to any vehicle or device to
which the improperly handled or installed lighting is attached.
Improperly installed product may cause electrical injury to persons.
It is recommended that the kit should be installed by a licensed professional.
XKGLOW assumes no liability for the installation of the product.
Warranty or liability will not exceed the product purchase price, which shall be buyer's sole and exclusive
remedy.
1. Email [xk@xkglow.com] to notify us of the product issue as well as the item number and name of customer
on invoice.
2. We will send you the trouble-shooting guide to fix the issue, or to narrow down which of the component(s)
need to be replaced. If the issue still exists, we will ask you to send back the defective items to be replaced.
3. Please send the returned item as instructed, along with claims and a telephone number where you can be
reached.
4. After the returned item(s) have been accepted and inspected, we will issue a refund or replace the items
ASAP. For refunds, item(s) must be sent to XKGLOW within 14 days from date of purchase. Original shipping
charges are not refundable.
We always stand behind our products and are committed to our customers! For questions you may have,
please contact xk@xkglow.com. We normally respond within 24 hours. (Monday-Friday).
Input
Voltage
12V DC
Warranty and Disclaimer
Additional Disclaimer Terms
Return/Exchange Procedure
Controller Max
Load
3 amps
Controller
Size
1.75" x 0.8" x 0.35"
(44.5mm x 20mm x 9mm)

Advertisement

loading

Summary of Contents for XKGlow XK-MINI-KIT

  • Page 1 Return/Exchange Procedure 1. Email [xk@xkglow.com] to notify us of the product issue as well as the item number and name of customer on invoice. 2. We will send you the trouble-shooting guide to fix the issue, or to narrow down which of the component(s) need to be replaced.
  • Page 2 Connect to 12V DC power: Firmly connect the wire terminals to the positive and negative poles of the battery. Plug the controller into the power wire harness. Power on, download the XKchrome App, and enjoy! Please note: There are multiple XKGLOW apps on the App Store. Only the XKchrome App will work with the XKchrome Bluetooth Controller.
  • Page 3 FCC Statement 15.19 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.