Download Print this page

Avex Easy Presenter 3 Series Quick Start Manual

Easy Presenter 3-Serie

NPACKING

Unpacking of the Easy presenter is easy.

Just follow the steps:

1. Make sure the trolley is placed with two

meter free space at the back of the trolley.

2. Cut all the ribbons that hold the Easy

Presenter on its place

3. Open the lowest box.

4. Cut the sides of the back of the box and

fold it backwards to the ground.

5. Remove the protection from the wheels

6. Release the breaks from the wheels

7. Stand behind the trolley and slowly slide

the trolley backwards from the pallet. Do

this with two persons to ensure the safety!

8. Unpack the remaining packing material

and recycle the waste.

Table of Contents

Need help?

Do you have a question about the Easy Presenter 3 Series and is the answer not in the manual?

Page 1 Easy Presenter 3-Serie NPACKING Unpacking of the Easy presenter is easy. 5. Remove the protection from the wheels Just follow the steps: 1. Make sure the trolley is placed with two meter free space at the back of the trolley. 2.
Page 2 HOW TO USE THE RESENTER 1. Drive the Easy Presenter to the right place. 2. Lock the brakes on the wheels. 3. Put the power plug into a 230V power socket 4. Connect the image source and audio to the matching connector 5.
Page 3 3. FAQ Volume is to low Check if the output volume of the source device is put on maximum. The audio cable is connected, but there is no sound output Check if the playback devices on your device are selected to the right output. In case you use HDMI the playback device on your laptop should also be on HDMI.