Table of Contents
Advertisement
Quick Links
Bluetooth Headset User Guide
XERO XBS-02 2-in-1
Stereo Bluetooth Headset
1. About XERO XBS-02
The Bluetooth headset XBS-02 allows you the freedom to make and
receive calls while on the move or in the office, after you connect
the headset to a compatible phone that supports Bluetooth wireless
technology. XBS-02 is a stylish design with metal casing and only
5.5mm thickness. It applies dual microphones combined with latest
CVC software to do echo and noise cancellation. With additional
earphone, you can also enjoy music transmitted by the mobile via
Bluetooth.
Read this user guide carefully before using the headset. Read also
the user guide for your phone, which provides important safety and
maintenance information.
2. Bluetooth wireless technology
Bluetooth wireless technology makes it possible to connect
compatible communication devices without using cables. A
Bluetooth connection does not require that the phone and the headset
be in line of sight, but both devices should be within 10 meters
1
Advertisement
Table of Contents
Related Manuals for XERO XBS-02
Summary of Contents for XERO XBS-02
- Page 1 Stereo Bluetooth Headset 1. About XERO XBS-02 The Bluetooth headset XBS-02 allows you the freedom to make and receive calls while on the move or in the office, after you connect the headset to a compatible phone that supports Bluetooth wireless technology.
-
Page 2: Charging The Headset
(30feet) of each other. Connections can be subject to interference from obstructions, such as walls or other electronic devices. XBS-02 is compliant with Bluetooth Specification v2.1 supporting Headset profiles 1.1 and Hands-Free Profiles 1.5. There may be restrictions on using Bluetooth technology in some locations .Check with your local authorities or service provider. - Page 3 charged before used for the first time. It takes you about 3 hours to charge the battery full for the first time. During charging, the indicator shows a steady blue. When the battery is fully charged, the blue light will turn off. For the later on charging, it takes about 90 minutes.
-
Page 4: Pair The Headset With A Compatible Phone
*The maximum operating range depends on the usage frequency and environmental factors 5. Switch on or off the headset To switch on, when XBS-02 is in off state, press and hold the answer/end key for 4 seconds until the blue indicator light turns on and keeps on for 3 seconds. - Page 5 Bluetooth devices. Check the user guide of your phone for instructions. Step-4 Select the headset XBS-02 from the list of found devices. Step-5 When asked the PIN code, please enter “0000” to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing.
- Page 6 · Check that the headset is within 10 meter(30 feet ) of your phone and that there are no obstructions between the headset and the phone, such as walls or other electronic devices. If no paring is made over a period of time, the headset will retreat paring mode.
- Page 7 been recorded. Step-1 Enable voice recognition function of your mobile and set the mobile to handsfree state. Step-2 When no call is in progress, press and hold the answer/end button for 4 seconds until you can hear beep sound from the headset. Step-3 Speak out the name of the person you wish to call loudly.
-
Page 8: Led Indication
music. 7.9 Adjust the earphone volume Press the volume + key to increase or - to decrease the volume during a call or listening to music. 7.10 Previous/Next song When playing music, press and hold volume + to play previous song or volume–... -
Page 9: Specification
9. Specification * Bluetooth Specification v2.1+EDR class 2 * The latest version of A2DP1.2 and AVRCP1.0 profiles support * Supports Bluetooth Headset and Hands-free Profile（HFP 1.5） * RF Frequency Range: 2.402-2.480GHZ, 2.4G ISM band * Radio Performance: Receive Sensitivity of -90dBm, TX Power Max 4dBm * Frequency Response: 20 Hz - 20 KHz, Very high Signal to Noise Ratio (SNR):95 Db, Total Harmonic Distortion (THD):0.1%,... -
Page 10: Care And Maintenance
Leaving the device in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15℃ and 25℃ (59℉ and 77℉). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. - Page 11 shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. · Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. ·...