Behringer EUROLIVE B15X Quick Start Manual page 15

(EN) Step 2: Controls
(1) LCD SCREEN displays the current DSP module
and parameter settings.
(2) ENCODER KNOB controls volume
when the default DSP menu is active.
Press the encoder knob to access DSP
sub-menus and parameters. When the
sub-menus are active, rotate the knob to
change parameters.
(3) WIRELESS SYSTEM LEDs indicate wireless
microphone signal input.
(4) WIRELESS SYSTEM USB input accepts only
the Behringer wireless microphone receiver.
NOTE: The wireless USB input works in
parallel with the INPUT A/B analog inputs,
which means the wireless microphone signal
can be heard at the same time as audio
coming in through the INPUT A/B connections.
We recommend you unplug the INPUT A/B
connections in order to hear the wireless
microphone signal alone.
(5) INPUT A/B combo jacks accept input signals
over XLR balanced, ¼" TRS balanced, or ¼" TS
unbalanced connectors.
(6) MIX OUTPUT jack sends a combined signal
from all inputs (INPUT A/B jacks, wireless
microphone, and Bluetooth) out over a
balanced XLR connection.
(7) POWER SOURCE jack accepts the included
IEC cable.
(8) POWER switch turns the unit off and on.
15
Quick Start Guide