E.K.T. URC22B-12 Quick Start Manual

UNIVERSAL 12 IN 1
Model: URC22B‐12
FOR TV/TXT‐VCR‐SAT/DSS/CABLE‐HIFI‐CD‐LD/VCD/DVD‐AUX:
Manual Programing:
1‐put batteries in the control and turn on the TV/TXT or VCR or SAT or DSS or CABLE or HIFI or
CD or LD/VCD/DVD or AUX and point the control at it
2‐look at the name of the TV/TXT or VCR or SAT or DSS or CABLE or HIFI or CD or LD/VCD/DVD
or AUX in the codes table and see its code
3‐press (set) then (TV/TXT or VCR or SAT or DSS or CABLE or HIFI or CD or LD/VCD/DVD or AUX)
at the same time the indicator lights up
4‐enter the code you need the light will go off
5‐try the control
Auto Programing:
1‐put batteries in the control and turn on the TV/TXT or VCR or SAT or DSS or CABLE or HIFI or
CD or LD/VCD/DVD or AUX and point the control at it
2‐press and hold (SET) and (POWER) until indicator lights up
3‐watch the TV/TXT or VCR or SAT or DSS or CABLE or HIFI or CD or LD/VCD/DVD or AUX and
when the device power off press any key except (SET) immediately
Note: you have to press any key except (SET) directly when the device power off
4‐try the control if it did not work good repeat the operation again