Steps To Connect To Pc; Change The Mouse Top Cover And Side Buttons; Troubleshooting - Cosmic Byte KILONOVA 3325IC User Manual

Steps to Connect to PC

1. Unpack the mouse from the packaging and remove the plastic lm from the mouse feet if any.
2. Connect the mouse to the PC using the USB C to USB A cable and charge the mouse for use.
Once charged disconnect the cable and insert the wireless dongle stored in the mouse
compartment to the PC USB port.
3. The mouse will be detected by Windows within 5-30 seconds.
4. Download the software for the mouse from the Cosmic Byte website.
5. Install the software (Note: Some antivirus may try to stop installation as software would not be
updated in their database, so disable antivirus before installation)
6. Once installed restart your PC.
7. Your mouse is now ready for use. You can customize the functions of the mouse
using the software

Change the Mouse Top Cover and Side Buttons

· Your Cosmic Byte mouse comes with replaceable top cover and side buttons.
· The top cover and side buttons are attached to the mouse using magnets.
To replace it just pull the top cover or side buttons from the mouse and replace it
with the optional cover and buttons.

Troubleshooting

1. Unable to detect mouse on PC
Ans: Try connecting the mouse on a di erent USB port on the PC.
Try connecting the mouse directly on the motherboard USB port of the PC.
Connect the mouse to the extension adapter supplied.
2. Software does not detect the mouse.
Ans: Kindly uninstall all other mouse software previously installed on the PC.
Restart the PC, unplug the Mouse and reinsert it again.