Magnitone PLUCK IT 2 Instruction Manual page 4

EN
1
2
3
4
HOW TO CLEAN PLUCKIT2:
• Switch the appliance off.
• Clean the epilating caps after each use.
• Use the soft cleaning brush provided to remove hair debris accumulated in the epilating
discs of the epilating head, caps and the housing of the epilator.
• Wash the caps in warm soapy water. Rinse well and shake off the excess water. Allow
all parts to dry completely before reattaching them.
• Wipe the external surfaces of the epilator with a soft, damp cloth. Wipe clean and
allow to dry. Do not submerge PluckIt2 in water.
• Do not use aggressive cleaners, scouring agents, petrol or acetone.
• Never try to remove the epilating discs from the epilating head.
DISPOSAL:
This product is classed as Electrical or Electronic equipment. Please ensure that at the end
of the life of this product it is disposed of in the correct manner in accordance with local
authority requirements. It must NOT be disposed of with household waste.
CHARGING YOUR PLUCKIT2:
• Make sure the appliance is turned off
• Connect the Micro-USB cable into the device (1) and into
USB port or USB plug (2)
• The red light will turn on
• Once fully charged the charging light will turn white
• Charge time is approximately 1 hour until fully charged.
HOW TO USE PLUCKIT2:
• Epilation is most effective after taking a bath or having a
shower.
• Make sure your skin is clean, dry and free of any creams
or oils or makeup.
• Select the cap you require: Precision or regular head.
• To change caps, simply pull hard on either side of the white
head. (3)
• Move the Power button upwards to select the speed you
require (Use Speed 1 for areas with little hair growth, hard-
to-reach areas and for around knees and ankles. Use
Speed 2 for larger areas with more hair growth or thicker
hair).
• Use your free hand to stretch the area of skin you are going
to epilate to push hairs up on end.
• Place the epilator perpendicular to the skin (4).
• Move slowly over the skin, against the direction of hair
growth.