Nortel CallPilot Norstar Quick Reference Card

CallPilot Quick Reference Card
Norstar Voice Mail interface -
Remote Users
New
Messages
Mailbox
Commands
Oper
Back

Accessing your mailbox

¤
Listen to New
Messages
⁄
Company
Greetings and
Directory Call Forward
Options
⁄
Record Greetings
⁄
Primary
Record
Messages
Saved
Messages
Copyright © 2005–2006
Nortel Networks, All
Skip
rights reserved
NN40090-105 01.01
From your telephone:
1. Enter the CallPilot system number and then enter the CallPilot extension.
2. Enter your mailbox number and password and press
3. Follow the voice prompts and press the dialpad keys for the features you want to use.
‹
Record
Message
¤ ›
Change
Password
¤ ‹
Alternate Personalized

Initializing your mailbox

You must initialize your mailbox to receive and store messages.
1. Dial the CallPilot system telephone number.
The CallPilot system number is:______________________.
2. Dial the CallPilot extension, then enter your mailbox number.
3. Enter ‚‚‚‚ (the temporary password) and press £.
4. Enter a new password from four to eight digits long that does
not start with zero, and press £.
5. Reenter your new password and press £.
6. At the tone, record your name in the company directory.
7. Press £ to end the recording.
8. Press £ to accept the recording.
9. Replace the handset to end the session.
Now you are ready to record your personal mailbox greetings and
use the CallPilot features described in this card.
Note: If you do not record a personal greeting, your
Company Directory name plays to callers.
For detailed information about using the Norstar Voice Mail,
interface, refer to the CallPilot Reference Guide.
£.
fl
Listen to Saved
Messages
fl
fi
Target Off-Premise
Attendant Message
Notification
Choose Greeting
⁄
Primary
°
Outbound
Transfer
Options
¤
¤
Alternate
°
Mailbox
Administration
•
Return to
Main
Menu
‹
Call Forward