1. Manuals
  2. Brands
  3. HellermannTyton Manuals
  4. Test Equipment
  5. Top Tronic TIN4D
  6. Instruction manual

HellermannTyton Top Tronic TIN4D Instruction Manual

Digital high voltage insulation tester
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DIGITAL HIGH VOLTAGE
INSULATION TESTER
-HV
EARTH
DIGITAL INSULATION TESTER
5kV
OFF
MICROPROCESSOR CONTROLLED
MODEL TIN4D
INSTRUCTION MANUAL
Model :
GUARD
HIGH VOLTAGE
2.5kV
1kV
500V
TEST
ON
START / STOP
TIN4D
TIN5D
0V
SAFETY PRECAUTION!
—Use only on de-energised system.
— Check test leads for defects.
— Always earth circuit under test.
— After testing, allow a few seconds for instrument to
discharge circuit under test .
OPERATING INSTRUCTIONS
1.Depress "ON" .
2.Insert leads into the instrument observing colour coding.
3.Clip BLACK Lead to earth .
4.Select test voltage and follow display instructions.
5.Touch RED lead to conductor under test . Stop test
Immediately if warning message and / or buzzer sound. This
indicates the presence of an external voltage which must be
removed.
Before proceeding, reset the tester by depressing "ON".
6.Connect RED lead to conductor and depress "TEST".(tests
up to 99.9S)
7.Display shows test duration, real time bargraph voltage
indication and insulation resistance.
INSULATION
GUARD
CABLE CORE
LINE
LINE
CAUTION
OUTER
SHEATING
COVERING
EARTH
+HV

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Top Tronic TIN4D and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for HellermannTyton Top Tronic TIN4D

  • Page 1 TIN4D Model : TIN5D DIGITAL HIGH VOLTAGE INSULATION TESTER GUARD EARTH LINE SAFETY PRECAUTION! —Use only on de-energised system. — Check test leads for defects. — Always earth circuit under test. — After testing, allow a few seconds for instrument to discharge circuit under test .

  • Page 2: Table Of Contents

    INDEX PAGE 1.SAFETY PRECAUTIONS .... 2.SPECIFICATIONS ...... 3.CONNECTIONS......4.TIN4D - INSTRUMENT LAYOUT 5.TIN5D - INSTRUMENT LAYOUT.. 6.PREPARATION FOR MEASUREMENT......7.FUNCTIONS......8.INSULATION RESISTANCE TESTING WITH TIN4D....9.INSULATION RESISTANCE TESTING WITH TIN5D....10. INITIALISING - STARTING THE TEST....... 11. MAINTENANCE AND CLEANING METHOD....

  • Page 3: Safety Precautions

    1.SAFETY PRECAUTIONS Electricity can be dangerous - handle it with care. Carefully read the following information before using the the tester. 1.1 The company will not accept liability for any damage or injury caused by misuse or non-complicance with Instructions and safety procedures. This instrument must be used and operated only by a competent trained person and in strict accordance with the instructions.
  • Page 4 1.6 The Tester has a live circuit warning bleeper. If it is connected to a live circuit of more than 500V, a rapid pulsating bleep will be heard and, in addition, the tester will display a warning message. should this happen, DO NOT proceed to test and immediately.

  • Page 5: Specifications

    2.SPECIFICATIONS Display 2 Lines x 20 Characters large L.C.D Bar graph shows test voltage-reise and decay. Test Duration is indicated in seconds. Warning of external voltage presence. Auto-Hold when test stopped and circuit discharge. Low Battery Indication. Insulation Both Models have Four Insulation test voltages and are Auto ranging.

  • Page 6: Connections

    Supply Power 8 x 1.5V "C" size Alkaline battery Control Type COMS Microprocessor Analog to Digital conversion Type Successive Approximation Low current (250uA Typical) Resolution 12 Bits (No Missing Codes) Keypad Type Tactile Membrane Switch Connections Type Color coded Sockets 3.CONNECTIONS GUARD EARTH...

  • Page 7: Tin4D - Instrument Layout

    4.TIN4D - INSTRUMENT LAYOUT Test Leads connections Voltage Liquid crystal Selection display Keys GUARD EARTH LINE SAFETY PRECAUTION! — Use only on de-energised system. — Check test leads for defects. — Always earth circuit under test. — After testing, allow a few seconds for instrument to discharge circuit under test .

  • Page 8: Tin5D - Instrument Layout

    5.TIN5D - INSTRUMENT LAYOUT Test Leads connections Voltage Liquid crystal Selection display Keys GUARD EARTH LINE SAFETY PRECAUTION! — Use only on de-energised system. — Check test leads for defects. — Always earth circuit under test. — After testing, allow a few seconds for instrument to discharge circuit under test .

  • Page 9: Preparation For Measurement

    6.PREPARATION FOR MEASUREMENT Check the following for damages and status 1. Display. Do not use the Instrument if the display looks abnormal. 2. Keypad. Visually check the Keypad. A damaged keypad will cause the instrument to malfunction. 3. Test Leads. Verify test Leads are free of cracks and check continuity.

  • Page 10: Functions

    7.FUNCTIONS Switching "ON" ON Switch "ON", by depressing the "ON" key TOPTRONIC TIN4D ..500v to 5kV Depressing the "ON" Key will start the Instrument, giving ...Insulation... The Manufacturer's name, type ..Tester..of Instrument and part Number. The Instrument will default to Select test the selections Menu.
  • Page 11 Insulation Testing ON Switch "ON", by depressing the "ON" key. TOPTRONIC TIN4D ..500v to 5kV Depressing the "ON" Key will start the Instrument, giving ...Insulation... the Manufacturer's name, type ..Tester..of Instrument and part Number. The Instrument will default to Select test the selections Menu.

  • Page 12: Insulation Resistance Testing With Tin4D

    8.INSULATION RESISTANCE TESTING WITH TIN4D Warning : Insulation test should be conducted on circuits that are de-energized. Ensure circuits are not live before commencing testing. TIN4D Turn instrument "ON" by pressing the "ON" button. The L.C.D. display will advance to the following screen. Select Test 5KV, 2.5KV, 1KV, 500V Select insulation test voltage, for example, 500V.

  • Page 13: Insulation Resistance Testing With Tin5D

    9.INSULATION RESISTANCE TESTING WITH TIN5D Warning : Insulation test should be conducted on circuits that are de-energized. Ensure circuits are not live before commencing testing. TIN5D Turn instrument "ON" by pressing the "ON" button. The L.C.D. display will advance to the following screen. Select Test 10KV, 5KV, 2.5KV, 1KV Select insulation test voltage, for example, 1000V.

  • Page 14: Initialising - Starting The Test

    10.INITIALISING - STARTING THE TEST Quick Test A Quick test (less than 16 Secretary) TEST is done by depressing "TEST" for less START/STOP than two seconds. Long Test A Long Test (up to 99.9 Sec) is done by TEST depressing "TEST" for more than three START/STOP Seconds.

  • Page 15: Maintenance And Cleaning Method

    11.MAINTENANCE AND CLEANING METHOD Battery replacement Your batteries are situated under the tester-to replace- Switch "OFF" the Instrument. Unplug the test leads from the tester. Unscrew the screw situated at the bottom of the battery cover. Slide the battery cover off the bottom of the tester. Remove the flat batteries from the batteries holder.

This manual is also suitable for:

Top tronic tin5d

Table of Contents