Advertisement
Thank you for purchasing our products!
You are advised to keep this user manual throughout the entire life of the product.
SAFETY MEASURES AND PRECAUTIONS
The device should only be installed and maintained when the power is off by qualified personnel authorized to perform
this type of work and in line with the local standard for the safe installation of electrical wiring and equipment and safety
requirements.
Read this manual carefully before using the device.
Keep the device for at least 2 hours under operating conditions before connecting it (to avoid condensation).
Do not open, modify and/or repair the device by yourself.
Electrical equipment connected to the device outputs should be protected by circuit breakers with a 10 A current rating.
The device should be operated and maintained in compliance with the requirements of the local standard for the safe
installation of electrical wiring and equipment, the Electrical Installations Code, and the Safety Rules for the Operation of the
Electrical Installations of Customers.
INTENDED USE
The eight-channel I/O interface module is designed for industrial and home automation systems, and the switching of low-
loads with group control functionality (centralized switching function).
FEATURES
- Absence of a single control center – failure of any module does not result in the failure of the entire system.
- Selectable switch type for each input – toggle wall switch or non-locking push button (tactile switch).
- Unlimited number of switches connected a single input to control the selected output from different locations.
- Tying the auxiliary inputs of different modules at a single central switch.
- Configuring selected inputs to detect long presses, which allows them to be used to control a group of outputs.
- The status of the selected outputs is retained in non-volatile memory when powering off and is restored upon re-
activation.
- Ability to automatically turn off outputs after a preset time period.
- Setting operating scenarios via ModBus RTU (RS-485) using free software and saving these settings in non-volatile
memory.
- Connection to RS-485 is only required for initial configuration of the module and is not needed during operation
(however, connection to RS-485 maintains direct control during the operation of the device).
2
Advertisement
