Subscribe to Our Youtube Channel
Summary of Contents for Zonestar P802
- Page 2 Item Name Function 20*4 LCD left Key back to Menu Key Open Menu Right Key Enter/Set Up Key Previous Item/Add Down Key Next Item/Sub...
- Page 3 extruder temperature bed temperature current/set current/set 200.5/200º H55/ 60º commands to be Z current positon executed 0.00 Buf: 0 Mul: 100 Flow:100 Printer Ready. extruder flow rate feedrate mul temperature & power state bar percentage 0.00 mm E1: 200.5/200ºC-> 0% X Y Z current 0.00 mm positon...
- Page 4 Name Function Quick Setting Quick setting of common parameters Poistion X Y Z & E axial move and Home Back Extruder and Bed temperature Extruder Quick Setting setting and filament extrude Position Extruder (when SD Card insert and mounted) Fan Speed File print browse files in SD card...
- Page 5 Name Function Home All X Y Z axial move to the origin Speed Mul. Set print feadrate multiple Back Set extruder flowrate multiple Home All Flow mul. Speed Mul.:100% Flow Mul.:100% Preheat extruder and bed to the Preheat PLA Preheat PLA default temperature of PLA Preheat ABS...
- Page 6 Back Name Function Home All Home All X Y Z axial move to the origin Home X Home Y X axial move to the origin Home X Home Z X Position Home Y Y axial move to the origin Y Position Z Position Home Z...
- Page 7 Back Name Function Bed Temp: 60ºC Temp. 0 : 190ºC Bed Temp Setting Bed temperature Extruder 0 off Setting Extruder temperature Temp.0 Extr. Position Set Origin Extruder 0 off stop Extruder heater Extr. Postion Filament extrude or retract Set to Origin set extruder current potion to origin Name Function...
- Page 8 Name Function Back display file in SD card and select one Print file Print file of them to print Delete file Mount display file in SD card and select one Unmount Delete file of them to delete Pause print Stop print Mount Mount SD-Card...
- Page 9 Name Function Back help you check the installation and Assemble check Assemble check wiring Echo : off Info : On When choice ON, echo command to Errors : On Echo serial port Dry run: On When choice ON,show debug Info information to serial port When choice ON,show Error...
- Page 10 Back Name Function General Acceleration General General parameter setting Feedrate Extruder Acceleration parameter setting Acceleration store to EEPROM Load f. EEPROM Feedrate X, Y, Z feedrate parameter setting Extruder Extruder parameter setting store to EEPROM Store the setting to EEPROM of MCU store to EEPROM Store the setting to EEPROM of MCU Don't change...
Need help?
Do you have a question about the P802 and is the answer not in the manual?
Questions and answers