Download Print this page

Advertisement

Quick Links

ΓΩΝΙΑΚΟΣ ΤΡΟΧΟΣ
HE115-125/950
ΓΩΝΙΑΚΟΣ
ΤΡΟΧΟΣ

Advertisement

loading
Need help?

Need help?

Do you have a question about the HE115-125/950 and is the answer not in the manual?

Questions and answers

Summary of Contents for Alirac HE115-125/950

  • Page 1 ΓΩΝΙΑΚΟΣ ΤΡΟΧΟΣ HE115-125/950 ΓΩΝΙΑΚΟΣ ΤΡΟΧΟΣ...
  • Page 2: Electrical Safety

    Angle Grinder 8.When operating a power tool outside, HE115-125/950 use an outdoor extension cord marked “W- Rated Voltage 220-240V~50/60HZ A” or “W”. These cords are rated for outdoor Input Power 950W use and reduce the risk of electric shock.
  • Page 3: Specific Safety Rules

    www.makute.com or against your body is unstable and may identical replacement parts. Follow lead to loss of control. instructions in the Maintenance section of 16.Do not force tool. Use the correct the manual. Use of unauthorized parts of tool for your application. The correct tool failure to follow Maintenance instructions will do the job better and more safely at the may create a risk of electric shock or injury.
  • Page 4 www.makute.com the flange (especially the installing surface) 15.Use the specified surface of the wheel or the lock nut. Damage to these parts could to perform the grinding. result in wheel breakage. 16.Watch out for flying spark. Hold the 9.NEVER use tool with wood cutting tool to let the spark fly away from you and blades or other saw blades.
  • Page 5 www.makute.com inner flange, look nut designed for use with cut-off wheels.(Fig 1) 1.Mount the inner flange onto the spindle. Fit the wheel/disc on the inner flange and screw the outer flange onto the spindle (Fig 2). 2.To tighten the outer flange. Press the shaft lock firmly so that the spindle cannot revolve, then use the lock nut wrench and Fig2...
  • Page 6 www.makute.com To stop the tool, release the switch to make the tool engine an abrasive wheel trigger to freely. (Fig5) damaged because of overload. Maintenance and Daily care 2.Generally speaking, please keep the CAUTION: grinding and cutting part of the wheel and Always be sure that the tool is switch disc in the scope of 15 to 30 degree with the off and unplugging before attempting to...
  • Page 7 www.makute.com...
  • Page 8 www.makute.com...
  • Page 9 www.makute.com...