Download Print this page

NDT EVOTIS Operation Manual

Digital electronic tapping exfoliation detector

Advertisement

Quick Links

EVOTIS
DIGITAL ELECTRONIC TAPPING
EXFOLIATION DETECTOR
OPERATION MANUAL

Advertisement

loading

Summary of Contents for NDT EVOTIS

  • Page 1 EVOTIS DIGITAL ELECTRONIC TAPPING EXFOLIATION DETECTOR OPERATION MANUAL...
  • Page 2 Introduction EVOTIS is designed to detect defects and quantitatively measure damage of composite structured materials. In order to fully realize its performance capabilities, please read this operation manual carefully. The following general safety precautions must be observed during all phases of operation of this instrument.
  • Page 3 The EVOTIS Package Contains the Following Items: Description Quantity Main Unit (Fig. 1) Auto Hammer (with connector cable) (Fig. 2) AC Adapter (Fig. 3) Dedicated USB Cable (Fig. 4) Communication Software (CD-ROM) (Fig. 5) AA Rechargeable NiMH Batteries (Fig. 6) Battery Charger (Fig.
  • Page 4 Test results will be notified to the operator in the following manner: When EVOTIS is in use, it displays both a standard value and a measured value corrected from an auto hammer at each stroke. A comparison of the standard and measured values are shown in four levels by three color LED lights and a buzzer sound at the designated ratio.
  • Page 5 AC Adopter Hub Console Battery Housing 1. “Ready” lamp 2. “Battery” lamp 3. “Start/Stop” button 4. Standard Value 5. Measured Value 6. Stroke counter 7. Standard value button 8. LED lights 9. Memory button 10. Buzzer On/Off button 11. Auto Hammer hub 12.
  • Page 6 Auto Hammer’s head to the surface of the good portion of the testing subject in the right angle. The hammer automatically hits the surface of the testing subject four times. EVOTIS takes the average measure of two values, excluding the highest and lowest values, and uses this as the standard value.
  • Page 7 Stainless steel hammer with a diameter of 10mm, powered by solenoid Tapping stroke length: Tapping wavelength: 2Hz (fixed) Cable: Weight: 250g (excluding cable) <AC Adopter> Output: DC5V <USB Cable> Dedicated USB cable to connect EVOTIS to a computer - 7 -...
  • Page 8 3. To avoid misreading test results, the surface of the testing subject must be cleaned before operation. 4. Remove batteries if the EVOTIS is not in use for an extended period. Care and Cleaning Clean the surface of the case with an alcohol-based substance. Do NOT use...
  • Page 9 Warranty The product described herein is warrantied against defects in material, design and workmanship for a period of one year from the date of shipment from Japan. Warranty does not apply to the consumable parts including batteries, charger, and hammer head of the Auto Hammer. Subject to the conditions and limitations described below, this product, if returned to us with proof of purchase within the stated warranty period, and if covered under this warranty, will be repaired or replaced (with the same...