Advertisement
Quick Links
Advertisement
Related Manuals for Wellcare TB-1780LCD
Summary of Contents for Wellcare TB-1780LCD
- Page 1 3 Barrel Hair Waver User Manual Model Number TB-1780LCD E209...
-
Page 2: Table Of Contents
Contents Important Safety Instructions Product Overview Operation Temperature Setting Specifications... -
Page 3: Important Safety Instructions
Important Safety Instructions READ CAREFULLY AND KEEP FOR FUTURE REFERENCE Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. - Page 4 • To protect against electric shock, do not immerse the power cord, plug or appliance in water or any other liquid. • Do not allow the cord to hang over the edge of the table or bench, touch hot surfaces or become knotted. •...
- Page 5 CARE, CLEANING AND STORAGE • ATTENTION: turn off the appliance before cleaning and disconnect the plug from the power outlet. • ATTENTION: do not use any alcohol, acetone, gasoline, abrasive cleaning objects to clean the plastic components. Do not use hard brushes or metal objects for cleaning. •...
- Page 6 • For additional protection, the installation of a residual current device (RCD/ Safety switch) having a rated residual operating current not exceeding 30mA is advisable in the electrical circuit supplying the product. If unsure, check with your electrician. CAUTION! Risk of Burning! The appliance gets very hot during use! Only touch the handle and switch.
-
Page 7: Product Overview
Product Overview Curling barrels Stand Barrel clamp lever LCD display Increase temperature: press repeatedly to increase the temperature of the barrels. Decrease temperature: press repeatedly to lower the temperature of the barrels. Press and hold to lock/ unlock. On/Off switch: press and hold to turn the device on. The LCD display will light up when on. -
Page 8: Operation
Operation • Connect the power cord to a power source. • Press and hold the on/off switch until the LCD display lights up, indicating the device is on. • Start with the lowest temperature setting (80°C) by pressing the decrease temperature button repeatedly. •... -
Page 9: Temperature Setting
Temperature Setting Please see below for recommended temperature settings for the hair type. Temperature Hair Type 150°C - 170°C Thin/fine, damaged or bleached hair 180°C - 190°C Normal hair 210°C Thick hair... -
Page 10: Specifications
Specifications Input Voltage AC 220-240V, 50Hz Power Consumption 130W Temperature Range 80°C - 210°C Weight 580g (approx) Dimensions (mm) 385 x 105 x 75 For Technical and Warranty Support 1300 886 649 tempo.org/support Distributed by Tempo (Aust) Pty Ltd, PO Box 132, Frenchs Forest NSW 1640 Compliance This appliance has been fully tested and meets all requirements as set out by standards AS/NZS 60335.2.23 for electrical safety. - Page 11 Notes...
- Page 12 Warranty returns Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product. Product does not work? If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on (AU) 1300 886 649 or (NZ) 0800 836 761 for advice.