Download Print this page

Silversphere Companion One WARB Operational Manual

Hardwired rf receivers

Advertisement

Quick Links

Companion One
WARB, WARB-SM
Hardwired RF Receivers
Operational Manual —
Add, Replace, Remove
Wireless Transmitters
Silversphere WARB hardwired RF receivers
work in conjunction with Silversphere "-W"
and "-R" series of hardwired emergency call
stations. WARBs act as a local receiver specific
to a zone – one resident apartment – and allow
for wireless emergency calls from anywhere
within a resident's apartment using any of
Silversphere's RF transmitter devices.
The "-W" station has an 8-pin modular jack
on its face to which the WARB hardwired RF
receiver connects. This receiver mounts in the
apartment somewhere out of the resident's
view. Stations designated with "-W" are made
in a variety of configurations in 1- and 3-gang
sizes. The WARB is compatible with them all.
An alternative is the WARB-SM, which
combines the WARB receiver with a surface
mount 3-gang box. The WARB-SM may only
be used with a 3-gang "-R" hardwired pull
station, which mounts inside of the box. Use
this receiver when there is no convenient place
to mount a standard WARB.
Companion One
Page 1
TM
Operational Manual— WARB / WARB-SM
©2014 Silversphere - Doc.OMWARB.0214
Companion One
(programming button)
WARB
Companion One
TM
(power
connection)
to pull station)
TM
(connection

Advertisement

loading
Need help?

Need help?

Do you have a question about the Companion One WARB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Silversphere Companion One WARB

  • Page 1 Operational Manual — Add, Replace, Remove Wireless Transmitters Silversphere WARB hardwired RF receivers work in conjunction with Silversphere “-W” Companion One and “-R” series of hardwired emergency call stations. WARBs act as a local receiver specific to a zone – one resident apartment – and allow for wireless emergency calls from anywhere within a resident’s apartment using any of...
  • Page 2 Reset the alarm at the pull station to While still holding down the programming which the WARB is connected. For more button, trigger the Silversphere wireless information about resetting alarms, transmitter you want to program. WARBs see Section 3: Placing and Resetting are compatible with all Silversphere Emergency Calls in this WARB manual.
  • Page 3 110 VAC wall outlet. This The CCDA can be only be used with a “-W” accessory cannot be used with the WARB-SM. hardwired pull station. Page 3 Operational Manual— WARB / WARB-SM ©2014 Silversphere - Doc.OMWARB.0214...

This manual is also suitable for:

Companion one warb-sm