Advertisement
ACL800FL-RU2 – Remote Relay Unit -
Installation Manual
Description / Operation
The ACL800FL-RU2 is remote relay control unit for
ACL870SU-BS and ACL870FL-BS biometric readers. If secure
installation is needed, the reader can be connected to this
remote relay unit located in a secured area. It has two relay
outputs and two RTE button inputs.
The connection between the reader and the remote relay unit
is done via RS485. Once the reader and the remote relay unit
Application Diagram
Figure 1: Application diagram
© 2018 United Technologies Corporation.
Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. All rights reserved.
R 485
s
(max. 50 m)
Secured Area
are paired, the reader will only use the relays on the
ACL800FL-RU2.
The device is already preset for use with the biometric readers.
Specifications
Output
2 Relays (3 A at 24 VAC/VDC)
Push button input
2
Door time
Pulse (1 to 60 s) or Toggle
Buzzer ON/OFF
Yes (follows the reader buzzer)
Operating voltage
9 to 14 VDC
Current consumption
80 mA at 12 VDC max
Mounting
DIN Rail or wall mount
IP rating
IP31
Operating environment
0 to +40°C
Temperature
noncondensing
Relative humidity
PCB dimensions ( W x
32 x 86 mm,
H )
4 fixing holes Ø 3mm
Housing
DIN Rail or Wall mount, plastic, size 2 unit
Weight shipping
120 g
Weight product
50 g
Dimension
90 x 37 x 33 mm
Outside
P/N 1073496A• REV 00.01 • ISS 4JUL18
Reader
Advertisement
Table of Contents
Related Manuals for Interlogix ACL800FL-RU2
Summary of Contents for Interlogix ACL800FL-RU2
- Page 1 Figure 1: Application diagram R 485 (max. 50 m) Reader Secured Area Outside P/N 1073496A• REV 00.01 • ISS 4JUL18 © 2018 United Technologies Corporation. Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. All rights reserved.
- Page 2 Figure 2: Application diagram Wiring Figure 3: Terminal block description Power supply (9 to 14 VDC) Power supply to the reader Push button inputs RS485 P/N 1073496A• REV 00.01 • ISS 4JUL18 2 / 4...
- Page 3 +12V G ND - Connect the door lock on the RU2 relay - The reader and the ACL800FL-RU2 should be connected with 4 wires: +, -, A and B (RS485). Max. 50 m. Pairing reader with ACL800FL-RU2 Figure 5: Pairing...
- Page 4 RELATED PRODUCTS. For more information on warranty disclaimers and product safety information, please check www.firesecurityproducts.com/policy/product- warning/ or scan the following code: For contact information go to: www.interlogix.com Contact or www.firesecurityproducts.com information and To get translations for this and other product manuals manuals go to: www.firesecurityproducts.com...
Need help?
Do you have a question about the ACL800FL-RU2 and is the answer not in the manual?
Questions and answers