Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for FingerTec i-Neighbour Siren Kit
Summary of Contents for FingerTec i-Neighbour Siren Kit
- Page 1 Siren Kit (SK-911) Installer Guide...
- Page 2 Siren Kit (SK-911) Extra Security for Emergency Get the i-Neighbour Siren Kit to enhance your residential secu- rity system fuss-free! The Siren Kit has a Raspberry Pi controller, an I/O board, and a power supply encased in a compact casing for an easy installation at the guardhouse.
- Page 3 UnderstandInG the sk-911 sIren kIt Resident presses panic button from AC110/240V i-Neighbour Power Input mobile app i-neighbour Cloud Base VMs system Wireless router connects to active Internet connection i-Neighbour Alarm Siren & i-Neighbour LED Display Panel Strobe Light Action Buttons UNDERSTANDING THE TECHNICAL SPECIFICATIONS hardWare Acrylonitrile Butadiene Styrene (ABS)
- Page 4 UnderstandInG the desIGn Power supply/power input module Connect this point to a AC 110 ~ 240V power source in order to generate a 12VDC 3A power output. By default, the -V and +V cables are connected to the inner parts of the I/O board.
- Page 5 These four ports are connected to three different buttons which control the SK-911 Siren Kit • Acknowledge Alarm Button When a resident triggers the Panic Button through i-Neighbour Mobile App, the SK-911 will activate the siren and strobe light in addition to instantly displaying the unit no. of the resident on the LED display panel.
-
Page 6: Wiring Diagram
Of WIrInG The i-Neighbour Siren Kit SK-911 has to be connected to a power source with AC 110 ~ 240V. The integrated switching power supply will automatically convert the input power to DC12V 5A to be distributed to the system. - Page 7 i-Neighbour i-Neighbour LED Display Panel Alarm Siren & Strobe Light strobe Power Input siren COM NO AC110 - 240V power input Acknowl- Stop Panic edge alarm alarm alarm button button button GND 12V+ GND From i-Neighbour SS-922 to connect to conventional siren or strobe light strobe Power Input siren...
-
Page 8: System Configuration
sYsteM COnfIGUratIOn step 1 • Connect SK-911 to the Internet You will need to connect the following items to the HDMI output and USB ports located at the SK-911 for the initial setup: 1. Keyboard (USB port) 2. Mouse (USB port) 3. - Page 9 The connection status icon will appears at the lower right corner indi- cating that a connection has been established. step 2 • Configure the display of SK-911 Click on the settings icon and fill in the default password (123456) to start configuring. You can change the password in the Pro- file tab later, following the instruc- tions below.
- Page 10 step 3 • Activate the SK-911 through an i-Neighbour account By using a computer, tablet or smartphone, visit login to the system admin’s account https://www.i-neighbour.com/ and follow the steps below in order to add the SK-911 into your i-Neigh- bour account: 1.
- Page 11 © 01 Timetec Computing Sdn Bhd. All rights reserved • 001...
Need help?
Do you have a question about the i-Neighbour Siren Kit and is the answer not in the manual?
Questions and answers