Advertisement
Filling the Tray
1. Remove the clear tray that is inside the dispenser. This makes filling the
tray easier.
2. e-pill MedSmart Voice comes with 9 different dosage templates. Each
template is designed for a specific number of alarms and, very
importantly, the time of day you are filling the tray. Place the correct
template based on your needs into the tray's template slot.
3. With the tray's e-pill sticker at 6 o'clock, fill the tray counter-clockwise.
The first dose goes into the compartment immediately to the right of the
tray's e-pill sticker.
4. Fill compartments (up to 28 dosages are available) with pills using the
dosage template as a guide.
5. Place the tray into the dispenser. Align the tray so that the compartment
with the tray's e-pill sticker is directly below the gray button labeled "B".
6. Close the lid, turn the dispenser over, and lock the dispenser
Locking and Unlocking the Dispenser
Lock: When closing the lid, you will NOT hear a click. Please double check that
the lid is completely closed before turning the dispenser over to lock it. To
lock, insert the key into the silver lock and turn the key counter-clockwise
(turn to the left) a ¼ turn.
Unlock: To unlock, turn the dispenser upside down, insert the key into the
silver lock and turn the key clockwise (turn to the right) a ¼ turn.
Note: When locking or unlocking do not use excessive force or turn the key
more than a ¼ turn.
SETUP – STEP 2
6
Advertisement
