Peak Season 10010040a Assembly Instructions

Assembly Instructions
Thank you for purchasing this quality product. Be sure to check all packing
materials carefully for small parts that may have come loose inside the carton
during shipment. Please read all instructions carefully before starting the
assembly process.
CAUTION: Some items and/or the components are cumbersome and heavy.
Therefore, the assistance of one or more people is recommended in order to
prevent personal injury and insure that the item and/or its components are
not damaged during the assembly process. Perform all assembly steps on a
flat, soft, non-abrasive surface. Do not over-tighten the screws or bolts.
Counter Table Base for 40" Round Stone Tops
Step I. On a flat, soft, non-abrasive surface, connect the table legs (B) to the table base
(A) by using: washer (C), spring lock washer (D), 35MM screw (F), hex wrench (I). Then
connect the table leg angle support by using: washer (C), spring lock washer (D), 15
MM screw (E), hex wrench (I). Do NOT tighten the screws until all have been inserted.
Once all screws have been inserted, securely tighten each of the screws using the hex
wrench (I). See Figure 1.
Step II. Attach the support frame (H) to the table legs (B) by using washer (C), spring
lock washer (D), 40MM screw (G), hex wrench (I). Do NOT tighten the screws until all
have been inserted. Once all screws have been inserted, securely tighten each of the
screws using the hex wrench (I). See Figure 2.
Page 1
Model # 10010040a
Figure 1