Advertisement
Steps:
2. Place the Top (A) face down on a soft and smooth surface such as a blanket or carpet.
3. Attach a Leg (B) into each corner of the Desk using the 60mm long Bolts (H1) Spring Washers
(H2) and Flat Washers (H3). Adjust the Leg in the corner if necessary to have the same reveal
on both sides and tighten using the Allen Wrench (H7).
4. After all four Legs are attached, turn the Desk upright and reinstall the drawers.
5. Attach the Drawer Knobs (H6) using the Hardware Screws (H4 & H5) to the Drawer Fronts as
shown, and using your screwdriver.
Step 2 & 3:
Step 4 & 5:
To reinstall the drawers, carefully align the channels of the guide and push drawer back into cabinet.
Open and close drawer fully a couple times to verify proper operation.
B
A
H6
H4
Page 2 of 2
H3
H1
H2
H7
H5
H6
!
WARNING
Pinch Point. Keep
fingers from underneath
drawer front when
releasing.
Advertisement
