Advertisement
OPTICAL REMOTE CONTROL
OVERVIEW AND SETTING
right side
Apply the device on the handlebar of the bicycle with
the O-Ring in a convenient position.
(see back page)
CONNECTION WITH MAGNETICDAYS
Plug the Optical Key cable into one of the two USB
of the smart trainer ( 1° or 2° starting from
sockets
the bottom).
REMOTE CONTROL
Occlude the right or left optical windows for about 2
seconds to adjust (+/-) the workloads.
In case of cabled RPM sensor, insert
the cable into the remaining USB
socket.
Functional LED
Optical Sensor
left side
EN
DON'T USE
the third slot
USB sockets
for Oprical
Keys and RPM
Sensor.
Advertisement
Table of Contents
Summary of Contents for Magnetic Days OPTICAL REMOTE CONTROL
- Page 1 OPTICAL REMOTE CONTROL OVERVIEW AND SETTING Functional LED Optical Sensor right side left side POSITIONING Apply the device on the handlebar of the bicycle with the O-Ring in a convenient position. (see back page) CONNECTION WITH MAGNETICDAYS DON’T USE Plug the Optical Key cable into one of the two USB the third slot of the smart trainer ( 1°...
- Page 2 OPTICAL REMOTE CONTROL POSITIONING The correct positioning of the device on the handlebar is important for the successful operation of the optical sensor. Apply the Optical Keys in the recommended position 1 or 2. POSITION 2 | LATERAL POSITION 1 | SUPERIOR...
Need help?
Do you have a question about the OPTICAL REMOTE CONTROL and is the answer not in the manual?
Questions and answers