Related Manuals for Daewoo EMERALD SDA2286
Summary of Contents for Daewoo EMERALD SDA2286
- Page 1 Emerald 1.7L 3kw Kettle Model No. SDA2286 User Manual IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE...
- Page 2 Emerald 1.7L 3kw Kettle Model No. SDA2286 User Manual READING AND STORING THE USER MANUAL Before using this product, please read through this manual carefully paying particular attention to the safety instructions. Failure to do so may result in personal injury or damage to the product.
- Page 3 Emerald 1.7L 3kw Kettle Model No. SDA2286 User Manual Always use this appliance on a solid, level, non-flammable surface. Do not use this appliance outdoors. It is imperative to unplug the power cord after the appliance has been used, before it is cleaned and whilst being repaired.
-
Page 4: This Appliance Must Be Earthed
Emerald 1.7L 3kw Kettle Model No. SDA2286 User Manual is boiling. CAUTION: The outside surface of the kettle will get hot during use. Ensure the kettle has switched off before removing it from the base. Please note, due to this being a rapid boil kettle it is recommended that you don’t use this in conjunction with any other appliances on a multi socket extension lead. - Page 5 Emerald 1.7L 3kw Kettle Model No. SDA2286 User Manual Explanation of Symbols The following warning symbols or words are used in this instruction manual: Products labelled with this symbol conform to applicable provisions of the European Economic Area. Products labelled with UK Conformity Assessment identifies products conforming to UK statutory requirements.
- Page 6 Emerald 1.7L 3kw Kettle Model No. SDA2286 User Manual Description of parts 1. Spout 2. Filter (Inside) 3. Lid 4. Handle 5. Water Gauge 6. On Off Switch 7. Base Before the first time you use your kettle Before using the kettle for the first time, fill to the max mark and allow the water to boil.
- Page 7 Emerald 1.7L 3kw Kettle Model No. SDA2286 User Manual To Fill the Kettle, press the Lid Release Catch (4) and the Lid (3) will open. Press the Lid (3) down after filling until it clicks into place. Fill the kettle to the desired level on the Water Gauge (6) ensuring that it is above the MIN mark and below the MAX mark.
- Page 8 Emerald 1.7L 3kw Kettle Model No. SDA2286 User Manual Push the On Off Switch (7) down which will illuminate and the water will begin to boil. At the end of the boiling cycle the Switch (7) will automatically switch off (pop up). Wait until the water has finished boiling before removing the kettle from the Base (8).
- Page 9 Emerald 1.7L 3kw Kettle Model No. SDA2286 User Manual Allow the kettle to boil, switch off and then stand to allow the kettle to soak for approximately 15 – 20 minutes, (if necessary, adjust the standing time to the descaling products instructions). Finally, empty the kettle and refill with fresh clean water and allow to come to the boil and switch off once more, then again pour the water away.
-
Page 10: Troubleshooting Guide
Emerald 1.7L 3kw Kettle Model No. SDA2286 User Manual Troubleshooting Guide Problem Possible Cause Possible Fix Kettle not boiling On Off Switch is not Press the On Off Switch (7) down. pressed down. Plug not inserted into the Ensure the mains plug is plugged mains socket and/or not into the mains socket and the socket switched on. -
Page 11: Warranty
As part of our commitment to quality, we are offering you an extra 2 years warranty in addition to your 1 year guarantee Your Daewoo product is guaranteed for 1 year from the date of original purchase, with proof of purchase or receipt. If any defect should occur due to faulty workmanship or material, your faulty product should be returned to the place of purchase, replacement or refund is at the discretion of the retailer.
Need help?
Do you have a question about the EMERALD SDA2286 and is the answer not in the manual?
Questions and answers