Advertisement
Quick Links
QUICK START
AfterShokz Loop100 USB-A Bluetooth® Adapter
Model: CL101A
*Compatible products: OpenComm, OpenComm UC
Pairing
1.
Start with OpenComm turned off. Press and hold the Volume+ button until the LED Indicator flashes red and blue.
2.
Plug the USB adapter into a USB port on your PC.
3.
Connection is established when Audrey says "Connected" or beeps. The LED on the USB adapter is solid blue.
4.
To play music or take calls on the headset, please check, and ensure the "AfterShokz Loop100" is the default input and output devices in
your operating system's audio settings.
Multifunction Button (Designer will put the chart into graphic presentation)
Multifunction Button
Function
Pair to a headset
Reconnect to the last connected
headset
Reset the adapter
The LED will flash blue rapidly.
Action
Press and hold for 2 seconds
Click once
Press and hold for 2 seconds, then
double-click
LED
LED
Flashes blue rapidly
Flashes blue every second
Flashes blue then turns solid blue for
5 seconds, then flashes blue rapidly
Advertisement
Summary of Contents for Aftershokz Loop100
- Page 1 Connection is established when Audrey says "Connected" or beeps. The LED on the USB adapter is solid blue. To play music or take calls on the headset, please check, and ensure the “AfterShokz Loop100” is the default input and output devices in your operating system’s audio settings.
- Page 2 LEGAL AfterShokz Loop 100 USB-A Wireless Adapter Model CL101A...
-
Page 3: Safety Instructions
· Do not disassemble the product. · Unplug, discontinue use, and contact Shokz if the product overheats or has a damaged outer casing or plug. Note Design and specification are subject to change without notice. For the most up-to-date product information, please visit www.aftershokz.com. - Page 4 FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired...
- Page 5 This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR). Resposible party (contact for FCC matters only): AfterShokz LLC. 3200 Gracie Kiltz Lane, Suite 400 Austin, TX 78758 USA www.aftershokz.com...
-
Page 6: Industry Canada
Industry Canada This device complies with Industry Canada licence- exempt RSS standard(s): Operation is subject to the following Two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. -
Page 7: Ce Declaration Of Conformity
Directive 2014/53/EU and all other applicable EU Directive requirements. The complete declaration of conformity can be found at: https://us.aftershokz.com/pages/policies. AfterShokz’s EU representative is AfterShokz Euro B.V., Schipholweg 103, 2316XC Leiden, Netherlands. Frequency: 2400-2483.5MHz Maximum Power: 5dbm... -
Page 8: Australia/New Zealand
Warranty: Shokz Holding Limited gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.aftershokz.com or contact your AfterShokz partner. Before putting the product into operation, please observe the respective country specific regulations.