Advertisement
3
在画出的轮廓处钻直径10mm，深70mm的安装孔，并打入不锈钢膨胀螺
钉。
Drill a mounting hole with a diameter of 10mm and a depth of 70mm at
the drawn outline, and drive in stainless steel expansion screws.
5
将产品主体套入堵头，使用紧定螺丝将产品安装在堵头上，并上紧。
Put the main body of the product into the plug, use a set screw to install
the product on the plug, and tighten it.
φ10mm
紧定螺钉
Set Screw
Undercounter Installation
Undercounter Installation
4
塑料套筒
Plastic Sleeve
将堵头安装到不锈钢膨胀螺丝上，并利用内六角扳手跟套筒组合使用将其
上紧。
注意：请将堵头的孔位如图错位安装。
Install the plug on the stainless steel expansion screw and tighten it
with the allen key and the
plastic
Note: Please install the plug hole in dislocation as shown in the figure.
6
安装完成，确认产品已经安装牢固，电源线正确连接后，方可通电使用
产品。
After installation, ensure that the product is installed firmly and the
power cord is correctly connected before the product power on.
4
sleeve.
Advertisement
