EK WMF Series Assembly Instructions

1
9
8
7
3
ASSEMBLY STEPS:
4pcs vertical rails
1. Use 8sets M6x12 pan head screws & cage nuts
to fix 4pcs vertical rails on the left & right frame.
Mounting bracket
4. Assembly the rear panel & mounting
brackets by 8pcs M3.5x6 screws.
2pcs Side panels
WMF SERIES WALL MOUNTED CABINET
ASSEMBLY INSTRUCTIONS
5
4
6
2
Left & right frame
4pcs horizontal beams
Cable entry
Rear panel
Front door
5. Install 2pcs side panels and the front foor.
Component list:
1. Top cover
1pc
2. Bottom plate
1pc
3. Left & right frame
2pcs
4. Vertical rails
4pcs
5. Horizontal beams
4pcs
Hardware list:
Assembly screws
a. M6x12 pan head screws
b. M3.5x6 pan head screws
c. M6 cage nuts
d. M6 flange nuts
Cabinet frame
2. Connect 4pcs horizontal beams and the
left & right frame by 32pcs M3.5x6 screws.
6. Front door
1pc
7. Side doors 2pcs
8. Rear panel 1pc
9. Mounting bracket 1pc
24pcs
40pcs a b
8pcs
16pcs
c d
Top cover
3. Connect the top cover & bottom plate with
the cabinet frame by 16sets M6x12 pan head
screws and flange nuts.
Finished
Bottom plate