Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Malfunction
Can't start or interrupt continuously
overheat
The wind is obviously less, and the
temperature rises.
The power cord's temperature is too
high or the plug's temperature is too
high. Sharply.
Does not work or does not respond after
the motor starts.
There are noise and burnt smell.
Noise when shaking or sharp friction
when starting up.
Possible Reason
1.
The power cord is not plugged in
well.
2.
The power cord is disconnected.
3.
Poor contact of the switch.
1.
The air inlet is blocked.
2.
The motor is not normal.
1.
Air inlet blockage.
2.
The motor is not normal.
3.
Diode damage.
Power cord disconnection is poor.
1.
Motor carbon brush wear abrasion.
2.
Motor damage.
Internal accessories are not normal.
Internal support is broken and damaged.
Solutions
1.
Plug in the socket.
2.
Ask the professional to replace the power cord.
3.
Ask the professional to replace the motor.
4.
Contact us.
1.
Please clean the air inlet regularly.
2.
Send the seller or the company to repair or get a
replacement.
1.
please clean the air inlet regularly.
2.
Send it to the seller or the company to overhaul.
1.
Ask the professional to replace the power cord.
2.
Contact us.
1.
Please stop using and contact us.
Please stop using and contact us.
Please stop using and contact us.
Advertisement
