Sable 1600201 Maintenance And Cleaning Manual

SABLE SLOW SPEED ATTACHMENTS
MAINTENANCE AND CLEANING MANUAL
Please retain this manual as your proof of purchase.
MODEL No. DESCRIPTION
1600201 1:1 NSK Type Contra -Angle
1600202 4:1 NSK Type Contra -Angle
1600203 16:1 NSK Type Contra -Angle
1600204 1:1 MW Type Contra Angle
1600210 1:1 NSK Type Contra -Angle
1600301 1:1 Straight Nosecone
1600302 1:1 MW Shorty &
Rhino Type Nosecone
1600303 4:1 Straight Nosecone
1600304 1:1 Lab Nosecone
1600310 1:1 Straight Nosecone
1600501 Midwest type snapon head (5K)
1600502 Midwest type screwin head (5K
1600503 Midwest Standard latch head (5K)
SAFETY PRECAUTIONS:
1. Always exercise extreme caution when operating your Slowspeed Attachment
2. Always inspect your Slowspeed Attachment thoroughly before each use.
3. Ensure proper burs are used for specific product. Use only burs that are DIN EN ISO 1797-1
norm and are made from hardened steel.
4. Do not use burs that are bent, worn or show any signs of damaged.
5. Ensure that the proper speed(rpm) attachment is used when selecting attachment and motor for Heads
6. Always use PPE (Proper Protective Equipment) when operating and cleaning your Slowspeed
Attachment See your Occupational Health and Safety Act or other safety ordinances for specific
instructions.
7. If product is dropped your dealer should be contacted, it is recommended that you do not use.
8. Contact your dealer right away if any problem should occur with any of your Sable products.
9. Sterilize before first use and before each subsequent use there after
10. This product is for use by a dentist or trained professional in the use of this product.
FEATURES
1. Attachments conform to International Standard Organization (ISO) specifications.
2. Will attach to all E type (ISO) Air Motors.
3. Autoclavable.
SPECIFICATIONS
1. Connection with Air Motor:
2. Method of Sterilization:
HOW TO USE
1. Slide Attachment onto shaft of E Type or MW type Air Motor until locked in place.
2. To remove Attachment: pull Attachment, pushing release button located on the exterior of
Air Motor.
3. Direction of operation is determined by Air Motor.
LUBRICATION
USE ONLY AUTOCLAVABLE HANDPIECE LUBRICANT.
1. Remove Attachment from Air Motor.
2. Remove Head from Attachment.
3. Apply lubricant into both ends of Attachment and reapply to Air Motor.
4. Run Air Motor and Attachment at normal speed for 10 seconds.
5. Wipe off excess oil from Attachment surface.
AUTOCLAVING PROCEDURE
1. Wipe off debris on the Attachment surface with alcohol-soaked cloth.
2. Lubricate the Attachment. (Refer to Lubrication Instructions).
3. Autoclave for 20 minutes at 135 C.
ATTENTION
This is a precision instrument. Do not drop or apply excessive force when handling.
WARRANTY INFORMATION
The Sable slow speed Attachment is warranted to be free of manufacturing defects for a
period of 3 months* from date of purchase.
*Warranty is conditional on proper use and maintenance of Air Motor. Warranty is limited
to repair or replacement at manufacturer's discretion. Under no circumstances will the
manufacturer be held responsible for incremental or consequential damages.
Please contact point of purchase authorized distributor for warranty repair.
Sable Industries Inc.
100 Campbell Ave. Suite 5
Kitchener, Ontario, Canada
N2H 4X8
Head Maximum RPM (5K or 20K)
1600401 Snap on Prophy Head (5K)
1600402 Screw-in Prophy Head (5K)
1600403 Standard latch Head (5K)
1600407 BB swing latch Head (20K)
1600405 Miniature latch Head (5K)
1600404 BB push Button Head(20K)
1600411 BB BP Latch Head (20K)
1600413 Sable friction grip Head (5K)
1600412 StarType BB PB latch head (20K)
1600406 StarType 12 tooth Standard latch
head(5K)
1600408 StarType snap-on head (5K)
1600409 Star type screw-in head(5K)
1600410 Star type BB SL head (20K)
1600504 Midwest BB PL head (5K)
ISO Standard
Autoclave
File no: PPIS1005 Rev-E,
SableSlowSpeedEtyp1
Date: 04/30/2014
PRINTED IN CANADA