Advertisement
LCD DISPLAY
FIGURE 2 – External Control LCD Display
Numbers show
current room humidity
OR humidity setting
Solid ON:
Control On
Blinking ON:
Dehumidifying
OFF: Control Off
90-1636
FIGURE 3 – Remote Control LCD Display
Numbers show remote
location humidity OR
dryness level setting
Solid ON:
Control On
Blinking ON:
Dehumidifying
OFF: Control Off
90-1636
4
SET is displayed
when
or
is
pressed. The value
displayed is the
humidity setting.
See Figure 5.
*
Blinking ON +
: Control Limit Exceeded.
See Control Limits, page 6.
SET is displayed
when
or
is
pressed. The value
displayed is the
dryness level.
See Figure 7.
TURNING CONTROL ON/OFF
• Pressing the ON button will turn on the control.
• Pressing the OFF button will turn off the control.
• The control will continue to display the measured
humidity when OFF.
• The humidity or dryness level setting cannot be
changed when the control is OFF.
CHANGING THE HUMIDITY OR DRYNESS LEVEL SETTING
• The first press of either the
or
setting on the LCD.
• Each subsequent push of the up or down
buttons will change the setting by 1% or 1
dryness level.
• If a button is held down, the setting will
continually change by 1% or 1 dryness level
every 1/2 second for as long as the button is
pressed.
• The control will exit the setting screen 5
seconds after the last button press/release.
FIGURE 6 – External Humidity
Setting Screen
90-1637
FIGURE 4 – ON/OFF Buttons
button will display the humidity or dryness level
FIGURE 5 – UP/DOWN Buttons
FIGURE 7 – Remote Dryness Level
Setting Screen
90-1636
5
Advertisement
