Remote Control Buttons And Basic Functions - JVC AV-29QT19 Instructions Manual

Remote control buttons and basic functions

• Insert two batteries by following the
polarities and inserting the
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly,
fit new batteries. The supplied batteries are
for testing, not regular use.
WARNING:
Batteries shall not be
exposed to excessive heat
such as direct sunshine,
fire or the like.
Operating the menus (\ page 7)
• Display the programme or video terminal number and
stereo/bilingual broadcast system.
• To return to the previous menu
Display information in text which are broadcasted by some
TV channels. (\ page 14)
RETURN PLUS function
Return to the frequently viewed channel.
Choose the channel you want to programme
Press and hold
To cancel
Press and hold
RETURN function
If you have not set or have cancelled the RETURN PLUS
channel, this will return to the previously viewed channel.
6
and
end first.
If this symbol
is shown, it is
only valid in
the European
Union.
RETURN PLUS
PROGRAMMED!
RETURN PLUS
CANCELED!
Turn the TV on from standby and vice versa
Programme and recall 4 favourite channels
(colour buttons: red, green, yellow, blue)
Choose the TV channel you wish to programme
Press and hold
Repeat to programme another favourite channel.
To recall the favourite channel, press the
corresponding colour button.
• When the TV is in Text function or MENU mode, the
������ favourite channel function is not available.
�������
• When the TV is in PIP function, the favourite channel
function cannot be programmed but can recall the
����
favourite channel.
TV or video terminal input selection, Exit from the menu
Turn the volume Off / On
Programme number selection
���
�����
For three digits :
��������
Adjust the volume level, Turn off Muting
Channel selection
Select the desired channel number.
For Hyper Scan
Press and hold
PROGRAMMED! ■
any button
100+
PR changes without changing the picture.
Once you stop pressing CHANNEL+ or
CHANNEL– button, picture will change
to the desired PR.