Page 1
LasTec Articulator Model 325EFR Owner's Manual Manual Part Number: Man-325EFR LasTec A Division of Wood-Mizer Products, Inc. 7865 N County Rd 100E Lizton, Indiana 46149 Phone (317) 892-4444 Fax (317) 892-4188 www.lastec.com...
Every 25 Operating Hours................5-1 Every 50 Operating Hours................5-2 Every 500 Operating Hours................5-2 Annual ......................5-2 Model 325EFR Articulator Specifications ............. 5-3 Model 325EFR Articulator Maintenance Chart..........5-5 Table of Contents 325EFR/Odoc100499 Go to www.lastec.com for latest changes in this manual.
Page 4
Go to www.lastec.com for latest changes in this manual.
You should now fill out the warranty registration form (located in the back of this section) and mail or fax it to LasTec. This form must be completed and returned to the factory within thirty (30) days of purchase in order to validate the warranty. Please do not hesi-...
90 days from the date of delivery of the new LasTec product to the original purchaser. Under no circumstances will it cover any merchandise or components thereof, which, in the opinion of the company has been subjected to negligent handling, misuse, alteration, accident, or repairs made with any parts other than those obtainable through LasTec.
Be sure to complete the following LasTec Warranty Registration Form and return to LasTec within 30 days of the purchase of your Articulator. This will aid you, LasTec, and your LasTec dealer in the warranting and servicing of your Articulator.
Page 8
Go to www.lastec.com for latest changes in this manual.
Page 9
Who referred you to the Articulator? Who was the salesman that assisted you? Please check the box to your left if you would not allow Lastec to use your company's name for marketing purposes. Go to www.lastec.com for latest changes in this manual.
Page 10
Go to www.lastec.com for latest changes in this manual.
Be familiar with and follow all safety rules in this manual as well all safety rules for any related equipment. Safety Information 325EFR/Odoc100499 Go to www.lastec.com for latest changes in this manual.
Safety is a primary concern in the design and manufacture of all LasTec products. Unfor- tunately, our extensive efforts to provide safe equipment can be negated by a single care- less act of an operator.
Always perform the pre-operation equipment inspection (Section 3) and the appro- priate maintenance schedule (Section 5) before operating the Articulator. Do not change the engine governor settings or over-speed the engine. Safety Information 325EFR/Odoc100499 Go to www.lastec.com for latest changes in this manual.
Do not mow in reverse unless absolutely necessary - and then only after careful observation of entire area behind the tractor and Articulator. Use extreme care and maintain minimum ground speed when transporting on a hill- 325EFR/Odoc100499 Safety Information Go to www.lastec.com for latest changes in this manual.
NEVER allow children on or around the Articulator! Never perform maintenance on the Articulator when children are present. Always perform the appropriate maintenance schedule(s) in a timely fashion. Safety Information 325EFR/Odoc100499 Go to www.lastec.com for latest changes in this manual.
Sand chipped or scratched areas and re-paint them to prevent rust during storage. Lubricate all moving parts of the tractor and Articulator to prevent rust during stor- age. Safety Information 325EFR/Odoc100499 Go to www.lastec.com for latest changes in this manual.
The Model 325EFR Articulator is designed to be mounted to the Ransomes 728D traction unit ONLY. Do NOT attempt to mount the Model 325EFR Articulator to any other traction unit make or model. Damage to the equipment and/or personal injury may result from installation and/or operation of the Articulator with an improper traction unit.
LasTec dealer for the proper belt lengths for your Articulator. If you are unable to install new belts with the idler arm at its minimum stroke, it is likely you are installing the wrong size belts. Contact your LasTec dealer for proper belt lengths for your Articulator.
If the belt you are checking is new, and the idler arm pivots to its maximum stroke without adequately tightening the belt, it is likely you have installed the wrong size belt. Contact your LasTec dealer for the proper belt lengths for your Articulator.
Keep all personnel clear of all controls while inspecting, adjusting, changing, or performing maintenance to the blades! The Model 325EFR Articulator utilizes three individual 25” high-lift blades, located under each articulated mower deck. NEVER go near, or expose yourself or others in any way to the blades while the engine is...
NEVER attempt to change the cutting deck height while the engine is running! The Model 325EFR Articulator has a standard mower deck height range of 1" to 4 1/2", in 1/4" increments. If you wish to change the mower deck height, do so before attempting to operate the Articulator.
Check that the discharge chute is clear of debris, properly mounted, and in good condi- tion. Inspect entire Articulator for loose or entangled parts, debris, obstructions, neglected tools, or any other possible safety hazards, equipment hazards or projectile hazards. Initial Set-Up 325EFR/Odoc061600 Go to www.lastec.com for latest changes in this manual.
Inspect entire Articulator for loose or entangled parts, debris, obstructions, or neglected tools. Perform all safety, set-up, and pre-operation procedures listed in your tractor manual. Complete the appropriate maintenance checklist (section 5). Initial Set-Up 325EFR/Odoc061600 Go to www.lastec.com for latest changes in this manual.
Page 24
Go to www.lastec.com for latest changes in this manual.
NEVER raise the Articulator into transport position while the PTO is engaged! The Model 325EFR Articulator can easily be lifted and transported by the tractor. Once the deck lift locking chains are locked into position, simply lift the arms to their maximum height.
Page 26
RPM. DO NOT EXCEED THIS RPM DURING OPERATION OF THE ARTICU- LATOR. Never operate the Articulator without all covers, shields, safety devices, and grass chute or mulching plate installed and secure. 325EFR/Odoc100499 Operating Procedures Go to www.lastec.com for latest changes in this manual.
The basic rule of thumb to use when judging the ability of the Articulator to handle a con- toured area is to cut the area with a 25" push mower set at the same height as the Articu- Operating Procedures 325EFR/Odoc100499 Go to www.lastec.com for latest changes in this manual.
Cutting Wet Grass Operation of the Articulator is not adversely affected by wet cutting conditions. However, a slower ground speed is recommended for improved grass discharge and reduced turf tear. 325EFR/Odoc100499 Operating Procedures Go to www.lastec.com for latest changes in this manual.
Perform the appropriate maintenance procedures listed in your tractor manual. Every 25 Operating Hours Complete the 8 Hour Maintenance Checklist. Grease all wheel hubs. Lubricate the PTO quick-disconnect pin or twist sleeve. Maintenance 325EFR/Odoc100499 Go to www.lastec.com for latest changes in this manual.
This kit is optional - contact your LasTec dealer for more information about the 040210 Kit. If installing the 040210 Model 325EFR Articulator Rebuild Kit, complete the 8, 25, 50, & 500 Hour Maintenance Checklists as a follow-up.
Deck EFR3 Belt Goodyear Insta-Power 85870 Gearbox Curtis Model 215A, Rat 1:1, Type B Gearbox Oil 16 Ounces Amoco Permagear EP 220 or Equivalent PTO Shaft Weasler 33 5/8” 212-19908 Maintenance 325EFR/Odoc100499 Go to www.lastec.com for latest changes in this manual.
Page 32
Go to www.lastec.com for latest changes in this manual.
Need help?
Do you have a question about the 325EFR and is the answer not in the manual?
Questions and answers