Advertisement
Table of Contents
Tool for Splicing and Self-Nocking
Article-Nr: 822
Congratulations to the purchase of your tool for splicing and self-nocking
With this handy tool you can easily repair all types of wooden shafts and
produce self-nocks.
Reparation of wooden shafts:
Introduce the final part that you want to repair, in the tool and fix it in the right
position by tightening the screws.
Fix now the tool on the work bench.
The next step is now to grind the free standing extremity by using sandpaper, as
you can see on the photo.
Repeat the same procedure with the second shaft.
Coat now the glue on the polished shaft, while it is clamped and fix the second
shaft at the height of its polished extremity, for example with the aid of a bar
clamp.
office@beier-distribution.de
- Seite 1 -
Beier Distribution e.K.
Wiesenstrasse 3a
D-96253 Untersiemau
Tel: +49 9565 617 30 - 0
Fax: +49 9565 617 30 - 2
www.by-beier-germany.de
Advertisement
Table of Contents
Summary of Contents for beier 822
- Page 1 Tool for Splicing and Self-Nocking Article-Nr: 822 Congratulations to the purchase of your tool for splicing and self-nocking With this handy tool you can easily repair all types of wooden shafts and produce self-nocks. Reparation of wooden shafts: Introduce the final part that you want to repair, in the tool and fix it in the right position by tightening the screws.
- Page 2 Turn in now the screws tightly and clamp the tool in a way that the self-nocker is upside. Use now a jig saw for sawing out the self – nock. Beier Distribution e.K. Wiesenstrasse 3a D-96253 Untersiemau Tel: +49 9565 617 30 - 0 Fax: +49 9565 617 30 - 2 www.by-beier-germany.de...
Need help?
Do you have a question about the 822 and is the answer not in the manual?
Questions and answers