Download
Share
Print this page
Ronin 2805-11 User Manual
  1. Manuals
  2. Brands
  3. Ronin Manuals
  4. Lifting Systems
  5. 2805-11
  6. User manual

Ronin 2805-11 User Manual

Hide thumbs Also See for 2805-11:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Ronin Lift User Guide
PN: 2805-11
System Overview
Motor & Gearbox
Rope Inlet Hole
Battery Indicator
Machine Guarded
Handle
Thumbwheel
Brake Handle
Deadman Trigger
Handle Optional
Rope Exit Hole
Upgrade
Carabineer Clip
Attachment Point
Tensioner Knob
REV. Q: DATE: DEC 10 2020

Advertisement

loading
Need help?

Need help?

Do you have a question about the 2805-11 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ronin 2805-11

Summary of Contents for Ronin 2805-11

  • Page 1 Ronin Lift User Guide PN: 2805-11 System Overview Motor & Gearbox Rope Inlet Hole Battery Indicator Machine Guarded Handle Thumbwheel Brake Handle Deadman Trigger Handle Optional Rope Exit Hole Upgrade Carabineer Clip Attachment Point Tensioner Knob REV. Q: DATE: DEC 10 2020...

  • Page 2: Equipment Inspection

    Guide is for Ronin Lift’s with Serial Numbers 3201-R or higher. Equipment Inspection Install the battery onto the Ronin lift, by sliding down from the top of the Ronin with some force. Be sure the battery is fully seated with the retaining clip being locked in place.
  • Page 3 No inner core should be exposed and BOTH rope tips should be coned. (Note: If you have a Tech-Nora or Kevlar sheathed rope, then ask Ronin about the Perfect Burn Tip). Inspect all PPE (Personal Protective Equipment) before use. Ronin Approved Ropes 1: Ronin HP Rope (MFG.
  • Page 4 Ronin Lift New User Guide PN: 2805-11 Rope Loading Rotate the Red Tensioner Knob fully to the Left, until the lever arm is bottomed out on the main housing. Turn knob Fully to the Left Rope Inlet Hole Insert the rope into the “Rope Inlet” hole. Push the rope into the rope inlet hole and TAP the thumbwheel.
  • Page 5 Rotate the thumbwheel down and ascend approx. 10ft, then stop. Make sure the system is not slipping on the rope. The Ronin is a no slip system, so if the system starts to slip on the rope, then stop. Turn the Red Tensioner Knob 1-2 additional turns to the Right, until the system no longer slips and continue your ascent.

  • Page 6: Equipment Storage

    (Note: You never want to store the Ronin with the battery connected). Charge the battery, if necessary (Be sure to remove the battery from the Ronin, before charging).