Advertisement
Quick Links
Dean Storage Queen Bed Assembly Instructions
Hardware included in headboard carton to attach bed feet and side rails.
A1
D
E
Φ8 MM
Φ6 MM
Φ8 MM
2PCS
7PCS
4PCS
1
Step#1
Attach side rails to headboard using Wrench (I), Bolt (B) and Washer (E)(factory installed).
Step#2
Retrieve bed feet from carton fastened behind the headboard.
Attach bed feet (F) to the headboard bracket using Nut (Z) , Spring Washer (A1) and Washer
(E),Tighten with Wrench (Y)
Attach bed feet (F) to the side rails.
CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
F
I
H=8 CM Φ8 MM
Φ8 MM
4PCS
1PC
*Bolt B and Washer E
are factory installed*
M
J
L
Φ6*40MM
H=26 CM
Φ8*50MM
3PCS
3PCS
2PCS
2
R
Y
Z
Φ6*25MM
4PCS
1PC
4PCS
Advertisement
Related Manuals for Living Spaces Dean Storage Queen Bed
Summary of Contents for Living Spaces Dean Storage Queen Bed
- Page 1 Dean Storage Queen Bed Assembly Instructions Hardware included in headboard carton to attach bed feet and side rails. Φ8 MM Φ6 MM Φ8 MM H=8 CM Φ8 MM Φ8 MM Φ6*40MM H=26 CM Φ8*50MM Φ6*25MM 2PCS 7PCS 4PCS 4PCS 3PCS...
- Page 2 Dean Storage Queen Bed Assembly Instructions Hardware included in side rails carton to attach center support system.. 13PCS *Bolt K and Washer E are factory installed* *Bolt B and Washer E are factory installed* Step#3 Attach Metal support beam (U) to side rails using Wrench (I), Bolt (K) and Washer (E) (factory installed).
- Page 3 Dean Storage Queen Bed Assembly Instructions Hardware included in headboard carton to attach bed feet and side rails. Φ8 MM Φ6 MM Φ8 MM H=8 CM Φ8 MM Φ8 MM Φ6*40MM H=26 CM Φ8*50MM Φ6*25MM 2PCS 7PCS 4PCS 3PCS 3PCS...
- Page 4 Dean Storage Queen Bed Assembly Instructions Hardware included in storage drawer carton. Φ6*15MM Φ8*30 MM H=8 CM Φ6 MM Φ8 MM 32PCS 16PCS 16PCS 32PCS 16PCS Step#8 Attach casters (C) to the drawer using Wrench (I), Bolt (A) and Washer (D).
- Page 5 Dean Storage Queen Bed Assembly Instructions Step#10 Attach drawers to the footboard using Wrench (I), Bolt (B) and Washer (E). *Factory installed guide rail keeps drawer centered* Step#11 Insert/Roll the drawer under the bed. Factory installed guide rail keeps drawer centered.